User manual MTD OEM-190-193

[. . . ] MULCH KIT: MODEL OEM-190-193 Operator’s Manual NOTE: Model 193 Mulch Kit is designed for use on tractors equipped with 48/50/54-inch cutting deck only. This will NOT mount, nor operate safely or properly on any other tractor regardless of the tractor’s compatibility with similar accessories. WARNING: Restrict the use of this accessory and the tractor to persons who read, understand and follow the warnings and instructions in this manual, the tractor manual and on the machine. Customer Support 1. [. . . ] Pivot the discharge chute up to access the deck opening. Insert the mulch plug in the deck opening, aligning the edge of the plug with the deck as shown in the figure. Make sure the notches on the plug are in the slots on the deck opening. Lightly tab on the plug with your hand so that the notches fit properly under the chute tabs and the plug is secure. Raise discharge chute this way • Insert mulch plug this way Deck Opening Operating Mulch Plug The mulch plug allows the tractor to recirculate grass clippings into the lawn where they act as a natural fertilizer. Observe following points for best results in mulching: • • • • Never attempt to mulch if the lawn is damp. Wet grass tends to stick to the underside of the deck preventing proper mulching. [. . . ] This will allow clippings to discharge from the side. PRINTED IN U. S. A. FORM NO. [. . . ]