User manual MTD OEM-190-602

[. . . ] SAVE THESE INSTRUCTIONS SERVICE INFORMATION DO NOT RETURN THIS PRODUCT Please call the Customer Support Department or visit our website for assistance: U. For assistance regarding the assembly, controls, operation or maintenance of the unit, please call the Customer Support Department. Additional information about the unit can be found on our website. Please call the Customer Support Department for replacement parts. [. . . ] € • • • • • • SAFETY AND INTERNATIONAL SYMBOLS • This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating, maintenance and repair information. sYMBOL MEANING • SAFETY ALERT SYMBOL Indicates danger , warning or caution. May be used in conjunction with other symbols or pictographs. € READ OPERATOR'S MANUAL Read the operator’s manual(s) and follow all warnings and safety instructions. Failure to do so can result in serious injury to the operator and/or bystanders. € WEAR EYE AND HEARING PROTECTION WARNING: WARNING: WARNING: Thrown objects and loud noise can cause severe eye injury and hearing loss. 1-1989 standards and ear protection when operating this unit. € KEEP BYSTANDERS AWAY Keep all bystanders, especially children and pets, at least 50 feet (15 m) from the operating area. If anyone enters the work area, stop the unit!€ WEAR SAFETY GLOVES Wear non-slip, heavy-duty protective gloves when handling the unit. € Inspect the product carefully to make sure no breakage or damage occurred during shipping. € Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. € If any parts are damaged or missing, please call 1-800-828-5500 (U. Remove the rubber protector from the end of the upper boom (Fig. Unfold the unit so that the lower boom is in line with the upper boom (Fig. NOTE: Make sure the coupler buckle is in the clamped position and that the coupler is at the top of its travel area on the lower boom. 10 STARTING AND STOPPING INSTRUCTIONS STARTING THE MOTOR Make sure the immediate area is clear of any objects or obstructions that could come in contact with the cutting head. To help prevent accidental start-ups, this unit has a lock-off button and switch trigger that must be used together to start the unit. Fit the battery into the handle cavity (Fig. This makes the switch trigger operational. While holding the lock-off button, press and hold the switch trigger. [. . . ] DO NOT get the solution in your eyes or on your skin, and do not swallow it. € Dispose of the battery pack in accordance with local state and federal regulations. Un chargeur conçu pour un type de batterie peut créer un risque d’incendie lorsqu’il est utilisé avec un autre type de batterie. NOTA: Failure to wind the line in the direction indicated will cause the cutting head to operate incorrectly. [. . . ]