User manual MTD OEM-190-821

[. . . ] Operator’s Manual FastAttach Triple Rear Bagger ™ For AutoDrive Garden Tractors ™ Model OEM-190-821 (for 46-inch decks) MTD PRODUCTS INC. BOX 368022 CLEVELAND, OHIO 44136-9722 PRINTED IN U. S. A. 770-10207 12/98 SECTION 1: FINDING YOUR MODEL NUMBER This Operator’s Manual is an important part of your new grass collector. It will help you assemble, prepare and maintain it. [. . . ] • Use extra care with grass catchers or other attachments. These can change the stability of the machine. • Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction. Rapid engagement or braking could cause the front of the machine to lift and rapidly flip over backwards which could cause serious injury. • Avoid starting or stopping on a slope. If tires lose traction, disengage the blade(s) and proceed slowly straight down the slope. 4. SERVICE • Use extreme care in handling gasoline and other fuels. They are extremely flammable and the vapors are explosive. • Never remove fuel cap or add fuel with the engine running. Allow engine to cool at least two minutes before refueling. 4 • Replace fuel cap securely and wipe off any spilled fuel before starting the engine as it may cause a fire or explosion. • Extinguish all cigarettes, cigars, pipes and other sources of ignition. • Never refuel the machine indoors because fuel vapors will accumulate in the area. • Never store the fuel container or machine inside where there is an open flame or spark, such as a gas hot water heater, space heater or furnace. • Never run a machine inside a closed area. • To reduce fire hazard, keep the machine free of grass, leaves or other debris build-up. Allow machine to cool at least 5 minutes before storing. • Before cleaning, repairing or inspecting, make certain the blade and all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the spark plug to prevent accidental starting. • Check the blade and engine mounting bolts at frequent intervals for proper tightness. Also, visually inspect blade for damage (e. g. , excessive wear, bent, cracked). Replace with blade which meets original equipment specifications. [. . . ] Do not use heat. B Figure 10 9 Model 821 19 1 15 1 8 4 15 8 17 15 8 17 17 15 33 25 29 31 3 8 11 22 5 15 14 7 28 6 26 9 21 24 31 27 14 34 2 23 15 13 10 16 15 18 15 15 15 12 20 32 9 30 10 Model 821 REF. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 PART NO. 16606 17200A 17201A 17204 17247 710-0473 710-0604 710-0751 710-3008 711-0309 712-0272 712-0431 712-0459 712-3004A 712-3027 714-0117 723-0383 731-0925 731-0926 736-0108 736-0255 736-0270 736-0407 738-0380 738-1020 742-0644 742-0645 749-0745A 749-0750 764-0251 783-0601 783-0673 783-0764 783-0765 DESCRIPTION Retainer Hook Bracket Catcher Support Bracket Bag Frame Hanger Bracket Cover Assembly Complete Support Tube Bracket Screw, #10-24 x . 5 Self Tapping Screw, 5/16-18 x . 625 Hex Cap Screw, 1/4-20 x . 62 Hex Cap Screw, 5/16-18 x . 75 Clevis Pin Hex Sems Nut, 10-24 Hex Flange Lock Nut, 3/8-16 Hex Flange Lock Nut, 7/16-20 Hex Flange Lock Nut, 5/16-18 Hex Flange Lock Nut, 1/4-20 Internal Cotter Pin, . 148 x 3 Retainer Strap Assembly Discharge Chute Chute Tube Flat Washer, . 51 x . 75 x . 033 Bell Washer, . 51 x 1. 14 x . 04 Bell Washer, . 265 x . 75 x . 062 Bell Washer, . 45 x 1. 0 x . 062 Shoulder Screw, . 50 x . 27, 3/8-16 Shoulder Screw, . 625 x . 5, 7/16-20 Star-center Blade, 16. 28 Star-center Blade, 14. 88 Grassbag Frame Tube Catcher Support Tube Grassbag Catcher Support Bracket RH Catcher Support Bracket LH Catcher Support Bracket Support Cross Bracket 11 MANUFACTURER’S LIMITED WARRANTY For TWO YEARS from the date of retail purchase within the United States of America, its possessions and territories, the manufacturer will, at its option, repair or replace, for the original purchaser, free of charge, any part or parts found to be defective in material or workmanship. This warranty covers units which have been operated and maintained in accordance with the operating instructions furnished with the unit, and which have not been subject to misuse, abuse, commercial use, neglect, accident, improper maintenance or alteration. [. . . ]