User manual MTD OEM-290101 INSTALLATION INSTRUCTIONS

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MTD OEM-290101. We hope that this MTD OEM-290101 user guide will be useful to you.

Lastmanuals help download the user guide MTD OEM-290101.


Mode d'emploi MTD OEM-290101
Download
Manual abstract: user guide MTD OEM-290101INSTALLATION INSTRUCTIONS

Detailed instructions for use are in the User's Guide.

[. . . ] Hitch– Mounting Plate . . . . . . . . . . . . . . . . 1 Hitch Pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Dust Caps – two, protective covers (shown in Figure 2). . . . . . . 2 Label – Warning . . . . . . . . . . . . . . . . . . . . . . . . . 1 CAUTION Put Wheels/Tines/PTO Drive Lever in NEUTRAL position. Stop engine, let all moving parts come to a complete stop, and disconnect spark plug wire. Failure to follow these instructions can result in personal injury of property damage. ASSEMBLY AND INSTALLATION Step 1: Remove the Tine Attachment A. [. . . ] • When an attachment is removed from the Power Unit, always place a wood block or other sturdy support beneath the coupling to prevent the attachment from falling forward. Figure 2: Insert both dust caps. Step 3: Install the Tow Hitch A. Align the hole in the right-hand corner of the Tow Hitch with the alignment pin at the PTO access hole. Move the swing-bolts into the slots in the Tow Hitch. Note that the washers on the swing-bolts should be next to the bolt heads. Tighten the swing-bolts by alternating between the two bolts to achieve even tightness. Tighten the bolts securely, using a 3/4" wrench at least 11" long (this length provides sufficient leverage to tighten securely), until the concave washers on both bolts are flat. Or, if you have a torque wrench, tighten each bolt to 70-80 ft/lbs. Step 2: Use of Dust Caps A. Two protective dust caps are provided with your new Tow Hitch. One dust cap is for the PTO access hole in the transmission. The other is for the dog clutch coupling of the Tine Attachment. Insert the smaller, 1-1/2 " dust cap into the PTO access hole, as shown in Figure 2, whenever the Power Unit is detached from the Tine Attachment. With the dust cap in place, the access hole is protected from the entry of dust, dirt and moisture. The dust cap may remain in place for the operation of non-powered attachments such as the Tow Hitch. It must, however, be removed before attaching the Tine Attachment or other powered attachments. [. . . ] If jack-knifing does occur, let go of the Wheels/Tines/PTO Drive Lever to stop movement. Be sure that nothing interferes with the operation of the Wheels/Tines/PTO Drive Lever or the Wheel Speed Shift Lever while you are turning. Make sure that you do not turn too sharply so you will always be able to easily reach these levers. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MTD OEM-290101

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MTD OEM-290101 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag