User manual MTD TB57

[. . . ] E8 In an effort to reduce the impact on forests, and reduce carbon and greenhouse gas emissions, MTD is using less paper by reducing the text size of this manual. Operator’s Manual 20 Volt Lithium-Ion Battery-Powered Trimmer TB57 All information, illustrations and specifications in this manual are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice. copyright© 2009 MTD SOUTHWEST INC , All Rights Reserved. [. . . ] refer to Starting and Stopping Instructions. € Verify that the battery is removed and the lock-off button is in the locked or OFF position before inspecting, adjusting or performing maintenance on any part of the unit. Align the tongue of the battery with the handle cavity (Fig. Push the battery into the handle cavity until the latch locks into place. Do not use force when inserting the battery. It should slide into position and “click. 8 LED Meter Cutting Head Shield Battery Charger CAUTION: When the battery is not installed in the unit, keep it away from paper clips, coins, keys, nails, screws or other metal objects that could make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns or a fire. Press the latch button on the battery down and hold (Fig. Grasp the rear handle firmly and pull the battery out of the handle cavity. NOTE: The battery fits into the handle cavity snugly in order to prevent accidental dislodging. It may require a strong pull to remove it. The battery is equipped with an internal circuit breaker that will automatically shut off power to the unit if the battery is overloaded during heavy use. Once cooled, the battery will reset itself. follow these steps if an overload occurs: 1. Release the switch trigger and then restart the unit. The battery may need to be removed for approximately 1 minute, allowed to cool and then reinstalled. 9 Cutting Head Handle Housing Battery Latch ASSEMBLY INSTRUCTIONS WARNING: Make sure the motor is off and the battery is disconnected before assembling or disassembling any components. battery This unit requires assembly. UNPACKING • Carefully remove the product and any accessories from the box. € Inspect the product carefully to make sure no breakage or damage occurred during shipping. € Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. [. . . ] E4 NOTES E5 NOTES E6 NOTES E7 MANUFACTURER’S LIMITED WARRANTY FOR: GARANTIE LIMITÉE DU FABRICANT POUR: GARANTÍA LIMITADA DEL FABRICANTE PARA: The limited warranty set forth below is given by Troy-Bilt LLC with respect to new merchandise purchased and used in the United States, its possessions and territories. Troy-Bilt LLC warrants this product against defects in material and workmanship for a period of two (2) years commencing on the date of original purchase and will, at its option, repair or replace, free of charge, any part found to be defective in material or workmanship. This limited warranty shall only apply if this product has been operated and maintained in accordance with the Operator’s Manual furnished with the product, and has not been subject to misuse, abuse, commercial use, neglect, accident, improper maintenance, alteration, vandalism, theft, fire, water or damage because of other peril or natural disaster. Damage resulting from the installation or use of any accessory or attachment not approved by Troy-Bilt LLC for use with the product(s) covered by this manual will void your warranty as to any resulting damage. [. . . ]