User manual MULHOLLAND ACROBAT

[. . . ] ACROBAT INSTRUC- INSTRUCTION MANUAL MULHOLLAND POSITIONING SYSTEMS INTRODUCTION 1 8 2 3 7 6 4 5 1 2 3 4 5 6 7 8 - Removable Tray - Removable back - Removable Seat - Angle Adjustable, swing-away foot-rests - Quick Release wheel - Telescoping Tray Supports - Folding Back Cane - Chair Tilting Lever ACROBAT INSTRUCTION MANUAL CONTENTS 9 10 13 11 12 9 - Seat Back Hooks 10 - Back Release Cord 11 - Folding Mechanism 12 - Swing-Away anti-tippers 13 - Back reflex tension springs MULHOLLAND POSITIONING SYSTEMS CONTENTS OF THE BOX Folded Acrobat frame Wheels attached Detached Swing-Away Foot Plate Detached Seat Insert Detached Back Insert Detached Tray (optional) 1 ASSEMBLY INSTRUCTIONS Remove entire contents from shipping box, insuring that you have all the contents listed above. A Grab each wheel and pull outwards, now grab each folding mechanism squeezing them and locate them into position. [. . . ] Once you have the desired angle set, push in on the spring loaded pin and push the lever down. (make sure the teeth fit snuggly toghether) To swing away the footrests pull up the locking mechanism and rotate the footrest in the required direction. E MULHOLLAND POSITIONING SYSTEMS Pull upwards on the black knob so that the bar is freed from its resting position, swivel armrest round and re-locate in either one of the notches. Make sure both sides are in same position other wise the tray and arm rests will not be parrallel. To prepare the armrests for tray mounting, you need to push in the metal nipple this enables the armrest to telescope, re-locate the nipple in the hole at the end of the rest. The tray can be located in any of the holes along the telescoping tube, this is done by pulling out the ring pulls on either side of the tray and just setting it on the tubes releasing the pins allows the tray to lock into the desired holes. To hide away armrest just do above in reverse order. ACROBAT INSTRUCTION MANUAL To enbable the trunk pad to swing away pull out on the ring pull and pull pad towards you, push the pad back to lock into place. To engage the wheel brake, push lever away from you. once the brake clicks into position the wheel is locked. to release the brake, pull the lever towards you. To enable the chair to tilt to a max. 35 degrees, you need to pull up on the trigger release on the push handles. Both sides need to be lifted similtaneously, tilt the chair to the desired angle and release triggers, the chair then locates into another locking position. (push down/back on the push handles to ensure that the chair is locked into position) The anti-tippers can swing away for when the chair is not in use or when folding the chair up to make it more compact. Simply swing the wheel clockwise and the anti-tipper will move inwards. MULHOLLAND POSITIONING SYSTEMS To disengage the flip down abductor pull the ring pull, this moves a locking pin which allows the abductor to flip down. Allows easy access for the user to the seat. [. . . ] (For wider seat inserts call customer service at Mulholland) By turning the Screw head clockwise you are compressing the spring which then sets the compressiveness of the back insert and canes when the user jerks. the more turns on the screw head the stiffer the back canes get and the less the user can jerk) MULHOLLAND POSITIONING SYSTEMS ACROBAT INSTRUCTION MANUAL MULHOLLAND POSITIONING SYSTEMS [. . . ]