Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MULTICOAT ICF STUCCO SYSTEM. We hope that this MULTICOAT ICF STUCCO SYSTEM user guide will be useful to you.
Lastmanuals help download the user guide MULTICOAT ICF STUCCO SYSTEM.
Manual abstract: user guide MULTICOAT ICF STUCCO SYSTEM
Detailed instructions for use are in the User's Guide.
[. . . ] Plywood substrates, including tongue and groove plywood, must be 5/8" minimum thickness, exterior grade CC PTS plywood, OSB, or better 16" oc maximum support spacing, edges blocked, all fastened with 8 penny ring shank nails or equivalent, on maximum 6" centers. (NOTE: Plywood/OSB must be nailed on all four sides. ) Moisture content should be below 15%. NOTE:
ALL ABOVE GRADE DECKS SHOULD BE PROPERLY VENTED.
Ready for Finish Texture, and ACRATHANE COLOR SEAL
KRETE KOTE/TOP COAT applied
APPLICATION
Lay out 2. 5 galvanized metal lathe in a staggered pattern over the entire plywood/OSB surface overlapping the metal flashing to the edge of the deck surface. [. . . ] The metal lathe joints must overlap a minimum 1". Staple metal lathe with minimum 7/8" crown by a minimum 5/8" long corrosion resistant staple spaced 3"oc in the field and 1"oc in all metal lathe overlap joints, plywood joints and perimeter of the deck. Mix MULTI-BASE per instructions on the bag and pour over the metal lathe. Trowel onto the deck covering the diamond lathe completely. A second skim coat must be applied after the first coat has dried to completely cover any metal lathe showing through. MULASTICOAT® is then applied over entire surface in two (2) thin coats with roller, using firm pressure. First coat is allowed to dry to the touch, usually 1-2 hours depending on ambient temperature. The second coat is applied crisscross to the first coat. COLORSEAL/MULTISTAIN - furnished in 1 and 5 gallon pails. Shelf life is approximately 24 months in unopened bags and approximately 18 months in unopened pails.
WARRANTY
Materials are guaranteed with respect to uniformity and quality within manufacturers' specifications. Seller makes no other warranty, expressed or implied, regarding the use of its products. Since use of the product is beyond Seller's control, the Buyer assumes all risks of use. Seller's sole obligation shall be to replace material if found to be defective. Seller shall not be liable for any damages, injury, loss, direct or consequential, resulting from use of its products.
TEST DATA
TEST METHOD RESULTS 1. ASTM C297 PLYWOOD CONCRETE Before Aging . . . . . . . . . . . . . . . . . . . . . . . . . . ASTM A756D & E 89 psi 218 psi Failure at: . [. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . ASTM A756D & E 89 psi 218 psi Failure at: . . . . . . . . . . . . . . . . . . . . ASTM D-1242A 1000Rev - 1000Gm Load 39 mil Loss 5. . . . . . . . . . . . . . . . . . . 2" Dia x 48" Water head for 48 Hrs No Loss 6. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MULTICOAT ICF STUCCO SYSTEM
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MULTICOAT ICF STUCCO SYSTEM will begin.
