Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual MULTICOAT KRETE KOTE. We hope that this MULTICOAT KRETE KOTE user guide will be useful to you.
Lastmanuals help download the user guide MULTICOAT KRETE KOTE.
Detailed instructions for use are in the User's Guide.
[. . . ] Cracks and imperfections must be repaired and proper expansion joints installed; cleaned and caulked if already existing.
BASE COAT APPLICATION TROWELED
APPLICATION
MULTICOAT KRETE KOTE and TOP COAT 2000 are furnished in 65 lb. bags and field mixed with potable (clean) water in the approximate amount of 13/4 -2 gallons per bag, preferably with a special MULTICOAT Mixing Paddle. [. . . ] Mix vigorously to disperse all lumps and to thoroughly wet all particles, . Suggest 1-11/2 minutes after all dry material added. Use margin trowel to clear vessel sides. Adjust to desired consistency by addition of dry material or small amount of water. For best results let Krete Kote or Top Coat stand in bucket for 3-5 minutes, then add a small amount of water and rebreak material. Mixed KRETE KOTE and TOP COAT 2000 are applied by roller, trowel, or squeegie in one coat plus texture coat, or two or more coats plus texture coat, depending on surface condition.
FINISH COAT TEXTURED IF DESIRED HOPPER GUN KNOCK DOWN
ACRATHANE COLORSEAL
With Hopper Gun - Trowel Knock Down to achieve French Lace Texture. ACRATHANE COLORSEAL must be applied in two thin coats. Since use of the product is beyond the Seller's control, the Buyer assumes all risks of use. Seller's sole obligation shall be to replace material if found to be defective. Seller shall not be liable for any damages, injury, loss, direct or indirect or consequential, resulting from use of its products. Limited warranty available to experienced MULTICOAT Certified Applicators.
COVERAGE
Each 65 lb. of KRETE KOTE or TOP COAT 2000 as described under "APPLICATION, " will cover approximately 100 sq. Each gallon of ACRATHANE COLORSEAL will cover approximately 150-200 sq. per gallon, depending on surface texture and/porosity. [. . . ] per gallon, depending on surface texture and/porosity. (See ACRATHANE COLORSEAL Instructions for use).
LIMITATIONS
Do not apply when substrate surface temperature is below 50°F, above 100°F if ambient temperature is below 50°F and falling, over 100°F and expected to rise, or if precipitation is expected within a 24 hour period.
TEST DATA -- KRETE KOTE 2000 / TOP COAT 2000
TEST METHOD RESULTS
1. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MULTICOAT KRETE KOTE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual MULTICOAT KRETE KOTE will begin.
