User manual MULTICOAT SLATEXABOVER

[. . . ] The SLATEX ABOVE GRADE SYSTEM is designed to withstand heavy foot traffic on decks, ramps, walkways, etc. The SLATEX ABOVE GRADE SYSTEM can be applied to concrete, wood, magnesite and most other surfaces or substrates in need of a waterproofing and/or fire resistant protective coating. FLASH ALL EDGES AND CAULK PLYWOOD JOINTS ADVANTAGES G Low Cost - Minimum Down Time - Easy to Apply G Superior Waterproofing G Hard, Durable, Anti-Skid Surface G Maintains Surface Integrity Over Minor Substrate Movement G Excellent Weather-Salt-Fire Resistance G Superior Bonding to Substrate G Excellent Freeze-Thaw Resistance G High Impact and Abrasion Resistance G Waterbase - Environmentally Safe to Use and Apply SEE TEST DATA MULASTICOAT POLY FAB EMBEDDED IN MULASTICOAT OVER JOINTS/FLASHING. [. . . ] First coat of KRETE KOTE/TOP COAT 2000 (see KRETE KOTE 2000 instructions for mixing information) is applied with roller, squeegee or trowel; fiberglass mesh is immediately embedded and troweled down firmly. Minimum 2 hours initial cure, longer in cool weather. Second coat of KRETE KOTE/TOP COAT 2000 is applied firmly with trowel. Minimum 2 hours cure time, longer in cool weather. Third coat is applied with trowel or hopper gun, depending upon whether smooth or textured finish is desired. Allow to cure a minimum of twelve (12) hours before allowing foot traffic and seventy-two (72) hours minimum for vehicular traffic, longer in cool weather. Not responsible for cracks and delamination caused by structural movement, improper substrate or application SEE WARRANTY. Do not bridge expansion or control joints with the Slatex System. All expansion or control joints must be cut and cleaned out and filled with approved caulking material. "Instructions for use. ") Allow minimum 24 hour cure before allowing foot traffic and minimum 72 hours before allowing vehicle traffic. COVERAGE MULASTICOAT (waterproofing membrane): 40 to 50 sq. (See "PACKAGING AND STORAGE") COLORSEAL 150 - 200 sq. per gallon (2 coats). LIMITATIONS Do not apply any components of the SLATEX SYSTEM when substrate surface temperature is below 50°F, above 100°F, if ambient temperature is below 50°F and falling, over 100°F and expected to rise, or if precipitation is expected within a 24 hour period. PACKAGING AND STORAGE MULASTICOAT - furnished in 1 and 5 gallon containers, 55 gallon drums and 275 gallon totes. KRETE KOTE/TOP COAT 2000 - furnished in 65 lb. [. . . ] 91 psi 202 psi Plywood Mulasticoat Failure at: . ASTM C1028 DRY . 75 - . 79 . 87 - . 88 Factor of Static Friction. [. . . ]