User manual MURATEC M-700

[. . . ] This facsimile machine has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against such interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Note: If a group number is already registered in this one-touch key, it is shown on the LCD. If you wish to change group number, press the [Clear] to erase it and then enter another group number. 3 4 To erase another one-touch number, repeat steps 24. Or press RESET to return to standby mode. Printing a list of one-touch numbers Forgot which number is stored in which one-touch key?Just print a list of your onetouch numbers. The list includes each key's number, the Location ID (if any), fax/telephone number and group number(s) you've stored in the key. To print a list of one-touch numbers, press MENU, A, [List]. 14 Use the numeric keypad to enter the call groups for this number. There are 32 possible call groups, numbered 132. If you want to assign the number to more than one call group, insert a comma after each number (except the last one) by pressing [Add]. Note: To assign this number to all 32 call groups, enter 0 (zero). 15 16 Press [Enter] to save the setting. If you do want to enter another one-touch number, go back to step 2. If you do not want to enter any more one-touch numbers, press RESET to finish. If the alternative number also fails, the fax alarm beeps to alert you of a problem. Note: Your fax holds a maximum of 10 alternative numbers in all, that is, only 10 speed-dials or one-touch numbers can have the alternative number. After you have entered the alternative numbers for 10 speed-dials or one-touch numbers, the machine will disable to enter the alternative number. Group number -- If you enter the group number, you can use the group dial transmission function. (See "Using call group, " page 2. 7. ) Note: If you wish to omit these settings, go to step 16. To enter the Location ID: Select the "Location" and press [Enter]. Note: If a Location ID is already registered in this one-touch key, it is shown on the LCD. If you wish to change the location ID, press the [Clear] to erase it and then enter another location ID. 11 12 13 Enter the alternative number using the numeric keypad. The number can be up to 40 characters long. Press [Enter] to save the setting and continue. To enter the Group number: Select the "Group No. " and press [Enter]. [. . . ] See also RCR. TCR Thermal (paper) printing -- A thermal head heats chemically treated, thermally sensitive paper in patterns conforming to the image the machine has scanned, creating a printed image. Thermal paper's tendency to discolor and fade, in addition to its curliness and the usual difficulty in writing on it, have made this method considerably less popular than plainpaper fax printing -- particularly as plain-paper fax machines have dropped sharply in price. TriAccess -- Muratec's TriAccess allows a Muratec fax machine to perform three or more tasks simultaneously without slowing. TTI -- Transmit terminal identifier. A user-programmable line of information sent automatically with every page a fax machine sends; it appears at the top of each page printed by the receiving unit. Transmission speed -- How fast a fax machine is sending a fax document. [. . . ]