User manual MURATEC PCAS 2.0

[. . . ] ENERGY STAR is a registered mark of the United States Environmental Protection Agency. Welcome to your Muratec fax machine! These instructions are divided into three sections. · "Getting started" (page 1. 1) covers only what you have to know to use your machine immediately. · "Beyond the basics" (page 2. 1) provides more details. When you have time, look through it to learn more about your machine's many features. [. . . ] You can specify up to 200 numbers for a remote "hub" unit. Enter Relay Number S001, G12_ 17 The machine asks how long you want to keep a document stored in your machine's F-Code box. The LCD shows: 22 Press ENTER to save the settings. The LCD shows: F-Code Doc Hold Time Hold Time(00-31): 00 Select TTI: Sender Program/Enter The machine asks for the type of TTI you want to appear on the faxes that are relayed to other callers. · Sender -- Relay the document with hub unit's TTI (don't send your TTI). · Both -- Relay the document with both the hub unit's TTI and your TTI. · Yours -- Relay the document with your TTI instead of the hub unit's. Press or /PROGRAM until the mode you want appears. 2. 37 Beyond the basics 23 Press ENTER to save the settings. The LCD shows: Auto Print: Off Program/Enter On: Print the document automatically when it's received. Off: The machine does not print it, but only relays it to the other machine. Press or /PROGRAM until the mode you want appears. Then press ENTER to save the settings and go on to step 24. Printing a list of documents stored in your F-Code boxes The list of documents stored in your machine's F-Code boxes includes: (1) Each box's identifier number (2) Box name (if any) (3) Box type (4) Each file number (or document number) that is stored To print a list of documents stored in F-Code boxes, press /PROGRAM, P, 3, ENTER. 24 The machine asks for your F-Code box's four-digit security I. D. Here we've entered 2345: Overwrite Doc. : Off Program/Enter If you choose: On: Your bulletin box erases the currently stored document when a new document is stored in it Off: Your bulletin box keeps both the currently stored document and the new document, up to 30 documents in each box. 03:Print F-Code Doc. Code:2345 5 8 9 Press or /PROGRAM until the mode you want appears. Press ENTER. If you've entered an incorrect I. D. code, your fax machine rejects the attempt and aborts this operation. code, the display shows: Press ENTER to save the setting. Your machine starts scanning the document into the selected bulletin box: 03:Print F-Code Doc. File:1 A4 Memory100% Important: The file number (shown above as 1) tells you how many documents are in this bulletin box. You need to know the file's number to erase or print it. 6 Use the numeric keypad to enter the file number (1-30) of the document you want to print. Here we've entered 3. 03:Print F-Code Doc. 3_ Note: If you want to print all documents stored in the bulletin box, simply enter 0 (zero). Printing a document stored in a bulletin box You can print a document stored in your machine's F-Code bulletin boxes without erasing the document from memory. To print a stored document: 7 1 Press ENTER. [. . . ] Muratec will complete the necessary adjustments and repairs within a reasonable time period, as dictated by the nature of the problem and by Muratec's service schedule. Replacement parts may have been used and/or reconditioned. Parts that have been replaced will remain the property of Muratec. This warranty is subject to the OBLIGATIONS and EXCLUSIONS set forth. EXCEPT AS EXPRESSLY SET FORTH ABOVE, AND EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, MURATEC MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTY ARISING FROM COURSE OF DEALING OR USAGE OF TRADE), AND MURATEC EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED HEREIN. [. . . ]