Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual NAD 116. We hope that this NAD 116 user guide will be useful to you.
Detailed instructions for use are in the User's Guide.
[. . . ] The unit may fall, causing serious injury to a child or adult and serious damage to the unit. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the unit. Any mounting of the device on a wall or ceiling should follow the maufacturer's instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. [. . . ] Do not use solutions containing benzol or other volatile agents. Input for the audio signal from a stereo VCR (or stereo TV/Satellite/Cable receiver) or other line-level audio source. Using twin RCA-to-RCA leads, connect to the left and right `Audio Out' of the unit to these inputs. Input for additional line level input signals such as another CD player. Use a twin RCA-to-RCA lead to connect the auxiliary unit's left and right `Audio Outputs' to this input. Use a twin RCA-to-RCA lead to connect the Tuner left and right `Audio Outputs' to this input. Using twin RCA-to-RCA leads, connect to the left and right `Audio Output' of the tape machine to the TAPE 1 IN connectors for playback and tape monitoring. Using twin RCA-to-RCA leads, connect to the left and right `Audio Output' of the tape machine to the TAPE 2 IN connectors for playback. Connect the twin RCA lead from your turntable to this input if you are using a Moving Coil cartridge. Use a twin RCA-to-RCA lead to connect to the left and right `Audio Input' of the Power amp or processor to the Pre Out connectors. Connect the twin RCA lead from your turntable to this input if you are using a Moving Magnet cartridge. The twin RCA lead from your turntable should also include a single wire earth lead Connect this to the NAD 116 phono (ground) connector. These actively driven XLR outputs are suitable to drive most balanced hi-fi and professional amplifiers. The wiring standard used for these connectors is: Pin 1 Chassis Earth (Ground) Pin 2 Hot (Live ) Pin 3 Signal Ground (Return) turned to minimum (fully anti-clockwise) before connecting headphones. Listening at high levels can damage your hearing. LED's inside each button will indicate which input is currently selected. The NAD-Link connector is used to pass commands from the remote control to and from other units fitted with NAD-Link connectors. This allows centralised control of a complete system or gives system control from more than one room. To function with other units, connect the NAD 116's NAD-Link OUT to the NAD-Link IN on the other unit. NAD-Link connectors can be daisy-chained, IN to OUT, so that a whole system can be controlled from the remote control facilities of one unit. A single NAD-Link connection from a hi-fi system in a second room will allow remote control of Multi Room systems. After you complete all connections to the preamplifier, plug the AC line cord into a "live" AC socket. [. . . ] sTANDBY Switches the NAD 116 between On and Standby modes. (Caution: Switch the NAD 116 off using the front panel Power switch when it is not being used for long periods of time. ) MUTE Press the MUTE Button to temporarily switch off the sound to the speakers and headphones. NO SOUND Power AC lead unplugged or power not switched on. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE NAD 116
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual NAD 116 will begin.
