User manual NAD C326BEE

[. . . ] ® Owner's Manual Stereo Integrated Amplifier C 326BEE SVENSKA NEDERLANDS DEUTSCH ITALIANO ESPAÑOL FRANÇAIS ENGLISH IMPORTANT SAFETY INSTRUCTIONS ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA Save theSe inStructionS for later uSe. follow all warningS and inStructionS marked on the audio equipment. 1 read instructions - All the safety and operating instructions should be read before the product is operated. 2 retain instructions - The safety and operating instructions should be retained for future reference. [. . . ] 11 volume: The VOLUME control adjusts the overall loudness of the signals being fed to the loudspeakers or headphones. Turn clockwise to increase the volume setting; counter clockwise to lower it. The VOLUME control does not affect recordings made using the Tape output but will affect the signal going to the Pre-amp output (PRE OUT). SVENSKA NEDERLANDS DEUTSCH ITALIANO ESPAÑOL FRANÇAIS ENGLISH IDENTIFICATION OF CONTROLS rear panel ENGLISH FRANÇAIS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ESPAÑOL ATTENTION! PleasemakesurethattheC326BEEispoweredofforunpluggedbeforemakinganyconnections. Itisalsoadvisabletopowerdownorunplugall associatedcomponentswhilemakingorbreakinganysignalorACpowerconnections. 1 mp input: Input for a Media Player or other line-level signal source. Use a twin RCA-to-RCA lead to connect the Media Player's left and right "Audio Outputs" to this input. NOTE IfanexternalMediaPlayerisconnectedtothefrontMPsocket(usinga 3. 5mmstereoplug)whilelisteningtoaMPline-levelsource, theexternal MediaPlayerwillbedirectlyselectedwiththeMPline-levelsource immediatelydisconnected. 2 cd input: Input for a CD or other line-level signal source. Use a twin RCA-to-RCA lead to connect the CD player's left and right "Audio Outputs" to this input. 3 tuner input: Input for a tuner or other line-level signal source. Use a twin RCA-to-RCA lead to connect the tuner left and right "Audio Outputs" to this input. 4 diSc input: Input for additional line level input signals such as CD, Mini Disc player or the output signal from a step-up amplifier for a turntable. Use a twin RCA-to-RCA lead to connect the auxiliary unit's left and right "Audio Outputs" to this input. 5 aux input: Input for additional line level input signals such as another CD player. Use a twin RCA-to-RCA lead to connect the auxiliary unit's left and right "Audio Outputs" to this input. 6 video input: Input for the audio signal from a stereo VCR (or stereo TV/Satellite/Cable receiver) or other line-level audio source. Using twin RCA-to-RCA leads, connect to the left and right `Audio Outputs' of the unit to these inputs. 7 tape in/out: Connections for analog recording and playback to an audio tape recorder of any type. Using twin RCA-to-RCA leads, connect to the left and right "Audio Output" of the tape machine to the TAPE IN sockets for playback. Connect the left and right "Audio Input" of the tape machine to the TAPE OUT sockets for recording. to make a recording When any source is selected, its signal is also fed directly to any tape machine connected to the TAPE OUT for recording. 8 Sub 1, Sub 2: Unlike the full range channels, there is no power amplifier built-into the C 326BEE for a subwoofer. [. . . ] · Check connections to all speakers in the system. · Power-up subwoofer, check subwoofer's AC outlet or check connections. · Place unit away from direct sun, reduce amount of ambient light. · Turn C 326BEE OFF; make sure ventilation slots on top and bottom of C 326BEE are not blocked. [. . . ]