User manual NAD C445

[. . . ] ® FM/AM/DAB Tuner Owner's Manual Manuel d'Installation Bedienungsanleitung Gebruikershandleiding NEDERLANDS DEUTSCH FRANÇAIS ENGLISH C 445422 Introduction IMPORTANT SAFETY INSTRUCTIONS WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO PORTUGUÊS SVENSKA 2 CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. Introduction IMPORTANT SAFETY INSTRUCTIONS WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. ENGLISH 3 SVENSKA PORTUGUÊS ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE The equipment draws its nominal non-operational power from the AC outlet with its POWER switch in the STANDBY position. [. . . ] Be certain to observe the (+) and (-) polarity indicators shown in the bottom of the battery compartment. · When using the C445 Tuner for the first time, it will be placed in a standby mode, as indicated by the amber colour of the Power Indicator. Once the unit is in standby, you may begin a listening session by pressing the System Power Control on the front panel or the Power On button on the remote control. Note that the Power Indicator will turn green. To turn the unit off at the end of a listening session simply press the System Power Control on the front panel or the Standby button on the remote. This places the unit in the Standby mode, and the Power Indicator will turn amber to remind you that the unit is ready for operation when a power command is received from the remote control. When you will be away from home for an extended period of time it is always a good idea to completely turn the unit off by unplugging it from the AC wall outlet. Note that the backup system in the C445 Tuner will retain information such as programmed presets for 14 days. To dim the brightness of the front panel display, press the Dimmer button on the front panel. The first press will dim the lights to half normal. A second press will turn the display to normal brightness again. DAB OPERATION When you turn on the tuner, the tuner will initialize. During 2 seconds, the display will show the following messages: STATION LIST Once the C445 Tuner has finished the scanning sequence, it will display the available stations in alphanumeric order. Turn the Control Ring clockwise or counter-clockwise to scroll through the list of available stations. The upper display line in the Information Display will always show the current station you are listening to. The lower display line shows the next station in the list. To select the next station, simply press the Select button on the front panel or on the remote control. The current station list will remain in the memory of the C445 Tuner. It can be updated by running the Autotune function as described above, or deleted by resetting the C445's memory (see page 14). NOTE: The station list can be shown in different order. It can occur that one of the stations in your list is temporarily not available. A "?" symbol will be visible in front of the station name to indicate such a station. [. . . ] Once you have found the program type you would like to listen to, press the Select Button. 3 Turn to Control Ring again to start the PTY Search. When a station is tuned, the search will stop and the display will show the station's "Call Letters" or other "Program Service" information. To turn off the PTY Search at any time, press the INFO Button again. [. . . ]