User manual NAD C556

[. . . ] Do not install the unit heat such as AND YELLOW. The wires in the mains lead on this product are colored in in a bookcase cabinet, or airtight rack where ventilation may be impeded. Accordance with the following code: Objects and pairs to this 5 BLUE - NEUTRAL liquid entry - Take care that objects or liquids do not get inside the checks to BROWN - LIVE the ventilation openings. 6 Carts and stands - When placed or mounted on a stand or cart, the mounted to a wall As these colors may not correspond with the colored markings identifying unit should be moved with care. [. . . ] OWNER’S RECORD For your convenience, record the model number and serial number in the space provided below. Please refer to them when you contact your dealer in case of difficulty. Sence of duct’s enclosure ute a risk of letter ‘L’ or colored RED • When replacing the fuse, only a correctly rated and approved type WARNING!Should be used, and be sure to re-fit the fuse cover. aPPLIANCE TO RAIN OR MOISTURE IF IN DOUBT CONSULT A COMPETENT ELECTRICIAN. Angle is intended operating e literature This product manufactured to to comply with the This product isis manufacturedcomply with the radio radio interference interference requirements of EEC DIRECTIVE 2004/108/EC. Requirements of EEC DIRECTIVE 89/68/EEC and 73/23/EEC round the unit than is equal to, ark of NAD Electronics International, a division of Lenbrook Industries Limited 08, NAD Electronics International, a division of Lenbrook Industries Limited РУССКИЙ The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. sVENSKA he plug fitted is ble is too short approved mains plug is ediately , to avoid mains supply. If s to be fitted, then EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. NEDERLANDS DEUTSCH TRIC SHOCK, OISTURE AND SHOULD NOT BE power plugs which can only be inserted one way into a power outlet. If it is difficult or impossible to insert the AC power plug into an outlet, turn the plug The materials can be reused in accordance with their markings. If it still other forms of recycling of old re-use, recyclingtryraw materials, or does not easily insert into the outlet, please call a qualified service technician to service or replace the outlet. Products, you are making an important contribution to the protection of Avoid defeating the our environment. Safety feature of the polarized plug, do not force it into a power outlet. 3 AC power cord - When disconnecting the AC power cord, pull it out by the AC Your local administrative office can advise you of the responsible waste power plug. Never handle the AC power plug with wet disposal point. Hands, as this could result in fire or shock. Power cords should be routed to avoid being severely bent, pinched, or walked upon. Pay particular RECORD YOUR MODEL NUMBER (NOW, WHILE YOU CAN SEE IT) attention to the cord The model and serial to the power socket. 355BEE overloading AC outlets and extension from the unit number of your new C Avoid are located on the back of the cabinet. For your future convenience, we suggest that you shock. Cords beyond their capacity, as this could result in fire or record these numbers here: 4 Extension cord - To help prevent electric shock, do not use a polarized AC power plug with an extension cord, receptacle, or other outlet unless the polarized plug Model number : . [. . . ] 4 Set the Bias adjustment slider to the same number as the tracking weight. CONNECTING THE C 556 Use the external phono leads to connect the C 556 to an amplifier. Use an external Phono Preamplifier (like one of NAD’s Phono Preamplifier series) if your amplifier has no integrated phono stage. 1 rpm 3 energy absorbent synthetic rubber feet ELECTRICAL CHARACTERISTICS Recommended load resistance Recommended load capacitance Internal inductance Internal impedance, DC resistance MECHANICAL CHARACTERISTICS Cartridge weight Tracking weight Replacement stylus unit PHYSICAL SPECIFICATIONS Unit Dimension (W x H x D) with dust cover down Net Weight Shipping Weight 447 x 115 x 360 mm 17 ³/₈ x 4 9/₁₆ x 14 ³/₁₆ inches 4 kg (8. [. . . ]