User manual NAD M5

[. . . ] ® Owner's Manual M5 ENGLISH CD/SACD Player SVENSKA PORTUGUÊS ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS Introduction IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS · Save these instructions for later use. · Follow all warnings and instructions marked on the audio equipment. 1 Read instructions - All the safety and operating instructions should be read before the product is operated. 2 Retain instructions - The safety and operating instructions should be retained for future reference. [. . . ] 13 Select the RANDOM function to randomly play various tracks on the CD or SACD player. Press once to engage the RANDOM function, a second time to clear the RANDOM function. 14 The number buttons are used for inputting numeric values when directly selecting media tracks. 15 Select the DIMMER function for dimming the M5's VFD. There are three levels; low, medium, and high brightness. 16 In Play mode, use the TIME button to display either; total time remaining or total time elapsed on the entire disc, as well as time remaining or elapsed per track on the VFD. 17 The VIDEO ON/OFF button is used to switch on and off the video output signal. 18 The CD FILTER button is used for selecting the bandwidth of the audio low pass filter for the CD media being played. The options are NORMAL Bandwidth and SLOW Bandwidth. For some recordings the SLOW Bandwidth may provide a wide frequency range and spatial feeling. Toggle between these two settings when the media is in STOP mode. This feature is not available for SACD media. 19 The MENU button automatically stops play of any media and returns the M5 to the primary menu of the media being played. For MP3 and WMA recordings the menu will become the recorded root directory. For Hybrid SACDs, the menu becomes the CD/SACD selection directory. 9 SVENSKA PORTUGUÊS ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS ENGLISH Operation OPERATION OF THE M5 INTRODUCTION When you want to play back SACD, MP3, WMA or audio CDs, turn on your audio system and the TV and then select the Composite Video input source connected to the CD/SACD player. Switch ON the rear panel POWER rocker switch. · You can open the disc tray by pressing this button even if the CD/SACD player is in standby mode. The power indicator will turn from amber to blue. Place a disc on the disc tray with the playback side down. · There are two different disc sizes. Place the disc in the correct guide on the disc tray. If the disc is out of the guide, it may damage the disc and cause the M5 to malfunction. [. . . ] · Turn on the video via M5 remote · Connect the video cable into the jacks securely. · Select the correct input mode of the audio receiver so you can listen to the sound from the CD/SACD player. · Connect the audio cable into the jacks securely. · Turn on the equipment connected with the audio cable. [. . . ]