User manual NAD T517

[. . . ] ® Owner's Manual DVD / CD / MP Player T 517 SVENSKA NEDERLANDS DEUTSCH ITALIANO ESPAÑOL FRANÇAIS ENGLISH IMPORTANT SAFETY INSTRUCTIONS ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA Save theSe inStructionS for later uSe. follow all warningS and inStructionS marked on the audio equipment. 1 read instructions - All the safety and operating instructions should be read before the product is operated. 2 retain instructions - The safety and operating instructions should be retained for future reference. [. . . ] When you turn back ON the T 517, the "Menu Language" OSD will appear. Use [ ] to select your preferred language. You will again be prompted to press [ENTER] to confirm your selection. ABOUT THE ON-SCREEN DISPLAY (OSD) The T 517 employs a self-explanatory on-screen display "menu" that will appear on the connected video monitor/TV. These are required during the setup process (and are useful in day-to-day operation), so be sure to connect the monitor/TV before proceeding with the setup. diSplaY the t 517 Setup menu Press the DVD 8's [SETUP] button for the Setup Menu OSD to appear. With the use of the DVD 8's navigation buttons, you may select various menus. If the Setup Menu does not appear, check your applicable video connections. 10 OPERATION uSing the t 517 ­Setup menu The Setup Menu allows one to customize the operation of the T 517. If the factory defaults do not suit your taste, you will need to use the setup menu to configure the T 517 yourself. To access and navigate through the Setup Menu selections, please refer to and follow the directions stated in the above section about "NAVIGATING THE SETUP MENU OSD AND MAKING CHANGES. " diSplaY mode Display Mode setting works only when the TV Aspect mode is set to 4:3. letterbox: Displays a wide picture with bands on the upper and lower portions of the screen. panscan: Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. tv output Select (230v verSion onlY) Set the player's TV Output Select options according to the TV connection type. rgb: Select when you connect the SCART OUT port with the use of a SCART connector (not supplied) to the corresponding SCART input of a compatible TV. There is no component video output when "TV Output Select" is set to "RGB". Ypbpr: Select this option for component video output to be available. LANGUAGE SETUP MENU AUDIO SETUP MENU DISPLAY SETUP MENU Check the documentation of your amplifier to verify its capabilities. drc (dYnamic range control) You can select the effective dynamic range (subjective range from soft to loud) for playback of Dolby Digital soundtracks. It is useful when you watch your favorite action movie without disturbing others at night. on: The "On" setting is for late-night sessions or other times when you wish to retain maximum dialog intelligibility while minimizing overall volume levels. This is applicable only for Dolby Digital soundtracks. off: To maintain full dynamic range, set to "Off". tv aSpect 4:3 : Select when a standard 4:3 TV is connected. 16:9 : Select when a 16:9 wide TV is connected. 11 SVENSKA Sample freq. (frequencY) Set the sampling frequency of the audio signal. [. . . ] · Point the remote control at the remote sensor of the T 517. · Operate the remote control closer to the T 517. · Replace the remote control batteries. noteS on diScS handling diScS Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. [. . . ]