User manual NAD T572

[. . . ] T 572 DVD / CD / MP3 Player GB Owner's Manual Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN Notes on copyrights: It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyright material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, the picture noise will appear. [. . . ] The setting of the selected item alternates between On and Off. Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan Digital Audio Output 5. 1 Speaker Setup Others DRC On Vocal On PBC On Dynamic Range Control (DRC) With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect. /PCM Stream/PCM PCM Vocal Set Vocal to On only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc will mix into normal stereo sound. Sample Frequency To change the Sample Frequency setting, first select the desired Digital Audio Output as indicated above. If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz signals to 48KHz so your system can decode them. If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is made, this unit will pass all signals through without down conversion, or processing. PBC Set Playback Control (PBC) to On or Off. On: Video CDs with PBC are played according to the PBC. Off: Video CDs with PBC are played the same way as Audio CDs. 13 PREPARATION Before Operation (Continued) Parental Control Rating DVD Country Code DVD Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs. The Parental Control feature allows you to prevent discs from being played by your children or to have certain discs played with alternative scenes. Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan Digital Audio Output 5. 1 Speaker Setup Others 8 7 6 5 4 3 2 1 Unlock Change Enter the code of a country/area whose standards were used to rate the DVD video disc, referring to the list (See "Country Code List", page 25. ). Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan Digital Audio Output 5. 1 Speaker Setup Others Code Set US Select "Rating" 1 and 4 buttons. on the Setup menu using the 3 2 While "Rating" is displayed, press 2. have not entered a password 3 When ayou personal 4-digit security number yet;then Install 4-digit password using the buttons to create a password, press SELECT/ENTER. Enter the 4-digit password again and press SELECT/ENTER to verify. When you have already entered a password; Install your 4-digit password using the number buttons to confirm the personal 4-digit security password, then press SELECT/ENTER. If you make a mistake before pressing SELECT/ENTER, press CLEAR and install your 4-digit security password again. 4 Select Country 1 the setup menu. Code using the 3/4 buttons on 2 While Country Code is selected, press 2. 3 Follow step 3 of "Rating" on left. 4 4 Select the first character using the 3/4 buttons. Shift the cursor using 1/2 5 the second character usingbuttons and select 3/4 buttons. 4 SELECT/ENTER to 6 Pressselection, then pressconfirm your country code SETUP to exit the menu. Note Confirmation of your 4-digit password is necessary when the code is changed (see "Changing the 4-digit code" below ). Changing the 4-digit code 1 Follow Steps 1-2 as shown above to the left (Rating). [. . . ] (Check the disc type, color system and Regional code. ) Place the disc with the playback side down. Place the disc on the disc tray correctly inside the guide. Cancel the Rating function or change the rating level. Point the remote control at the remote sensor of the DVD player. [. . . ]