User manual NAD T585

[. . . ] ® Owner's Manual DVD / SACD / MP3 Player T 585 SVENSKA NEDERLANDS DEUTSCH ITALIANO ESPAÑOL FRANÇAIS ENGLISH IMPORTANT SAFETY INSTRUCTIONS ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA Save theSe inStructionS for later uSe. follow all warningS and inStructionS marked on the audio equipment. 1 read instructions - All the safety and operating instructions should be read before the product is operated. 2 retain instructions - The safety and operating instructions should be retained for future reference. [. . . ] Displays a wide picture with bands on the upper and lower portions of the screen. Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. Select when a 16:9 wide TV is connected. Set the widescreen TV to FULL mode if necessary. NOTE Ifyouhavea16:9displaydeviceandyouhavedefaultedTVASPECTto "Widescreen16:9", itdoesnotmeanyouwillalwaysseemoviesinthis format-Widescreen16:9displayformatmustbesupportedbythedisc beingplayedinordertoviewthemovieinwidescreenformat. picture mode Set Picture Mode according to the type of content being viewed. There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second). auto: Identifies the type of material on the disc being played (film or video) and automatically selects the picture mode. film: Select when the disc contains film material recorded with the progressive scan mode. video: Select when the disc contains video material only. Signal mode Depending on the type of TV/Monitor set you own, select the signal mode you wish to watch your disc. Refer to your TV/Monitor's owner's manual to check its signal or system mode capabilities. auto: Automatically detects the signal mode of your TV/Monitor. ntSc: Select when the signal mode of your TV/Monitor is NTSC system. pal: Select when the signal mode of your TV/Monitor is PAL system. pal-60: Sometimes knows as "pseudo-PAL" with "60" standing for 60Hz instead of the normal 50Hz applicable for PAL system. This signal mode is mostly applicable for VCR or video consoles. black level (north america verSion onlY) Black level determines the amount of light a picture display emits for the darkest areas of an image. +7. 5 ire: IRE stands for Institute of Radio Engineers - higher IRE numbers mean more brightness. To access and navigate through the Setup Menu selections, please refer to and follow the directions stated in the above section about "NAVIGATING THE SETUP MENU OSD AND MAKING CHANGES". LANGUAGE SETUP MENU NEDERLANDS SVENSKA 1 OPERATION uSing the t 585 ­ Setup menu brightneSS/contraSt/Saturation/SharpneSS/gamma Picture Setting adjustment is available for the following options. brightness: Adjust overall brightness of the image. contrast: Adjust bright areas (white level) in the image. Saturation: Adjust the dullness or richness of image color. [. . . ] · The power of the equipment connected with the audio cable is turned off. · The AUDIO output settings are incorrect. ESPAÑOL The DVD player does not start playback. · An unplayable disc is inserted. · The rating level is set. ITALIANO DEUTSCH NEDERLANDS SVENSKA The remote control does not work properly. · The remote control is not pointed at the remote sensor on the DVD player. · The remote control is too far from the DVD player. [. . . ]