User manual NAD T760

[. . . ] NAD GB · OWNER'S MANUAL ©1999 NAD ELECTRONICS LTD. T 760 T 760 IMPORTANT SAFETY INSTRUCTIONS CAUTION ATTENTION: RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Warning: To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. ATTENTION POUR ÉVITER LES CHOC ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. [. . . ] The Digital Input 3 is linked to the Video 3 input (marked Digital In on back panel; No. Digital Input 3 allows for connection of a digital source with a Coaxial digital output. Whenever Video 3 is selected, Digital Input 3 will also be selected; in the display the "DIGITAL 3" indicator will start to blink. If a digital audio signal is detected, the "DIGITAL 3" indicator will stop blinking and remain lit. If no digital audio signal is detected, "DIGITAL 3" indicator will cease blinking and extinguish. VIDEO 5 Selects the camcorder or video game console conNAD 13 10. HEADPHONE SOCKET & VIDEO 5 INPUT HEADPHONE SOCKET A 1/4" stereo jack socket is supplied for headphone listening and will work with conventional headphones of any impedance. The volume and tone controls are operative for headphone listening. Use a suitable adapter to connect headphones with other types of connectors such as 3. 5mm stereo `personal stereo' jack plugs. Inserting a headphone will automatically turn off all speakers and signals from the Audio Pre-Out sockets. 5. 1 CH input is not available on the headphones socket. NOTES: In the OSD menu "Speaker settings" be sure to have selected and adjusted a preset with "MAIN SPEAKERS" set to "LARGE". If set to "SMALL", bass reponse will be limited. Refer also to Chapter "On Screen Display (OSD)" for more information. Listening at high levels can damage your hearing. VIDEO 5 INPUT For easy and temporary connection you can connect a camcorder (playback only) or video game console. If the game console or camcorder is mono, connect the audio lead to the R (Right) audio socket. 11. AUDIO & VIDEO INPUT SELECTORS & SURROUND MODE These buttons select the active video and audio input to the T 760 and the audio signal sent to the loudspeakers, Tape, Video 3 & 4 and TV monitor out- GB nected to the Video 5 front panel inputs as the active input. "VIDEO-5" is shown in the Display Panel when selected. 5. 1 Selects the multi-channel output signal from the DVD player or external decoder source (such as MPEG, for instance) connected to the 5. 1 Ch. 5. 1 audio signal is available from headphones socket, the Tape, Video 3 and Video 4 outputs when the Ext. SURROUND MODE With the Surround Mode buttons the available surround sound modes can be selected. [. . . ] If, on the other hand it is set too loud, the overall balance will sound unnatural. To adjust the channel balance the T 760 is equipped with a TEST button (No. 6) to help assess the loudness levels of each speaker. Before adjusting the channel balance level make sure the master volume is turned down to a normal listening level. [. . . ]