User manual NAD T761

[. . . ] NAD GB · OWNER'S MANUAL ©2001 NAD ELECTRONICS LTD. T 761 T 761 IMPORTANT SAFETY INSTRUCTIONS CAUTION ATTENTION: RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Warning: To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. ATTENTION POUR ÉVITER LES CHOC ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. [. . . ] The Video 1 input will also select the Component Video input; the signal will be routed to the Component Video output sockets. 8 in the chapter "Rear Panel Connections". VIDEO 2 Video 2 selects the signal from a TV/Satellite/Cable receiver or DVD player connected to VIDEO 2 as the active input. "VIDEO-2" is shown in the Display Panel when selected. 11. HEADPHONE SOCKET & VIDEO 5 INPUT HEADPHONE SOCKET A 1/4" stereo jack socket is supplied for headphone listening and will work with conventional headphones of any impedance. The volume and tone controls are operative for headphone listening. Use a suitable adapter to connect headphones with other types of connectors such as 3. 5mm stereo `personal stereo' jack plugs. De-select Speakers A and/or B to mute the loudspeakers for private listening. 5. 1 CH input is not available on the headphones socket. NOTES: In the OSD menu "Speaker settings" be sure to have selected and adjusted a preset with "MAIN SPEAKERS" set to "LARGE". If set to "SMALL", bass reponse will be limited. Refer also to Chapter "On Screen Display (OSD)" for more information. Listening at high levels can damage your hearing. VIDEO 5 INPUT For easy and temporary connection you can connect a camcorder (playback only) or video game console. If the game console or camcorder is mono, connect the audio lead to the R (Right) audio socket. 12. SPEAKERS A & B Pressing the Speakers A button will disengage the main loudspeaker system (the Front A, Center and Surround speakers). Press the button again to switch the speakers back on. NAD 14 GB The Digital Input 2 is linked to the Video 2 Input (marked Digital In 2 on back panel; No. Digital Input 2 allows for connection of a digital source with an Optical digital output. Whenever the corresponding digital input is activated, Digital Input 2 will also be selected; in the display the "DIGITAL 2" indicator will start to blink. If a digital audio signal is detected, the "DIGITAL 2" indicator will stop blinking and remain lit. If no digital audio signal is detected, "DIGITAL 2" indicator will blink. VIDEO 3 & VIDEO 4 Video 3 & 4 select the signal from a TV/Satellite/Cable receiver, DVD player or VCR connected to VIDEO 3 or VIDEO 4 as the active input. [. . . ] The center channel delay time adjustment is only available in Dolby Digital surround mode. To set the rear channel delay time, · Use the 3 or 4 cursor button (No. · Scroll the preset delay time options by 1 and 2 cursor buttons. Measure the distance from the listening position to either the left or right rear speaker (dLS or dRS). [. . . ]