User manual NADY CM-4S

[. . . ] BLACK CM-4S Stereo Condenser Microphone USER GUIDE Congratulations on purchasing the Nady CM-4S Stereo Condenser Microphone. [. . . ] All this contained in a compact, lightweight design for easy camera mounting The CM-4S has unbalanced, in-phase, low impedance stereo outputs. Use the 2' stereo cable to connect to 3. 5mm stereo inputs such as on camcorders or the 10' cable to connect to two channels of your mixing console or recording equipment. Placing the mic closer to the sound source will create a more pronounced stereo image while moving the mic further away will lessen the stereo image and result in more room noise. Placing a mic too close to a multi-voice source may result is some voices being more dominant than others. Experiment with placement for the best possible results. Set the STEREO/MONO/OFF switch to mono when stereo application is not desired. Before operating, install an alkaline AA battery by unscrewing, and sliding down, the lower portion of the handle to reveal the battery compartment. The CM-4S is only designed for battery use. [. . . ] Never spray any liquid on the microphone head. ) FREQUENCY RESPONSE -40 330 330 0 0 30 30 -50 300 300 60 60 -60 -70 270 270 90 90 -80 240 240 120 120 -90 20 50 0 Deg 100 200 180 Deg 500 1k 210 2k 210 180 5k 150 180 10k 150 20k POLAR PATTERN 0 330 30 330 330 0 0 30 30 0 330 330 0 30 30 300 60 300 300 60 60 300 300 60 60 270 90 270 270 90 90 270 270 90 90 240 120 240 240 120 120 240 240 120 120 210 180 150 210 210 180 180 150 150 210 210 180 180 150 150 MONO 0 STEREO 0 330 30 SERVICE 30 (U. S. ) Should your Nady microphone require service, please contact the Nady Service Department via telephone at (510) 652- 2411 or e-mail at service@nady. com. 300 (INTERNATIONAL) For service, please contact the Nady distributor in your country through the dealer 60 60 from whom you purchased this product. 90 270 90 Date of purchase _____________________________________________________________________________________________ Dealer's Name _______________________________________________________________________________________________ Street ______________________________________________________________________________________________________ City ____________________________________ State _____________________ Zip _____________________________________ 150 180 210 180 150 120 240 120 Note: Do not attempt to service this unit yourself as it will void your warranty. SPECIFICATIONS TYPE: Condenser DIRECTIVITY: Unidirectional Stereo SWITCH: STEREO/MONO/OFF SENSITIVITY: -68dB ±3dB @ 1 KHz (0dB = 1V/u) IMPEDANCE: 600 ±30% FRONT SENSITIVITY: 100Hz-16 KHz POWER REQUREMENTS: 1. 5V DC SIZE: 6" x 1. 2" (150 x 31. 2 mm) NET WEIGHT: 3. 8 oz (110 g) Specifications and design subject to change for improvement purposes without prior notice. 05/9/06 [. . . ]