User manual NADY IRW-220X

[. . . ] AC110V 50/60Hz ±5% Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8W Dimension (L x W x H) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10. 6" x 7. 4" x 2" (270 x 188 x 51mm) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (1. 5 kg) CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Keep it in a safe place for future possible reference. Do not attempt to service this unit yourself as it will void the warranty. (International) For service, please contact the Nady distributor in your country through the dealer from whom you purchased this product. 2 11 IRW-LT6X BODYPACK TRANSMITTER INTRODUCTION Thank you for purchasing the NADY IRW-220X infrared wireless microphone system and congratulations on your choice. The IRW-220X is loaded with top professional operating features and is the best performance and price value available in infrared wireless systems. b. Adjust the IRW-LT6X Volume Control(6) to minimum and slide the Power Switch (2) to the ON position. The bi-color Power ON/LOW Battery LED Indicator (1) will light green, indicating that the transmitter is on. In the case of low battery strength, the indicator will light red, indicating that the batteries should be replaced with fresh ones or the NiMH batteries should be recharged. The optional IRRA-1 Recharging Adapter can be plugged directly into the IRW-LT6X DC Input Jack(3) from an AC power outlet for easy charging of NiMH batteries. When the recharging adapter is plugged in, the LED Indicator will light red. The LED indicator will light green when the batteries are fully charged. The IRW-220X receiver IR LED Indicator of the corresponding channel should now be lit green. While speaking into the microphone, slowly increase the IRW-LT6X Volume Control(6) and adjust the volume control on the receiver, and also on the Mixer/P. A. to the desired level while taking care to avoid acoustic feedback. For optimum performance and range, make sure that the IR Emitter (4) is not covered by the body or clothing and has an unobstructed line of sight with the IR Sensor. USING THIS MANUAL This booklet gives instructions for the operation of the IRW-220X wireless system, including handheld and lavalier systems. Please read the instructions for your system completely before operating unit. This manual will first list the features of the IRW-220X and then will take you step by step to show you how to operate your new system. After reading the receiver instructions, turn to the section of the booklet that covers the type of transmitter used with your new system. Each section will give you detailed operating instructions. Also included in this manual are system specifications and servicing information. IRW-220X SYSTEM CONTENTS · IRW-220X dual channel infrared receiver · (2x) Infrared transmitters - either IRW-HT6 handheld microphone or IRW-LT6 body-pack with clip-on lavalier microphone · (2x) IRW-1S Infrared Sensor w/20 ft. RCA to 1/4" plug Audio Cable · Bodypack lanyard · (4x) AA Alkaline Batteries · Users Manual · Warranty Card [Note: Observe care in selecting volume, transmitter location, and speaker placement so that acoustic feedback (howling and screeching) will be avoided. Please also observe the pickup patterns of the microphone selected: omnidirectional mics pick up sound equally from all directions and are prone to feedback if not used carefully. Unidirectional mics are more resistant to feedback, but pick up sound sources best that are directly in front of the microphone. [. . . ] Since the unit utilizes infrared light reflected off of room surfaces, do not mount the sensors near a black ceiling, wall, or heavy curtains as they may limit the range by eliminating such reflection. Mounting the sensors in an uncluttered area near a light colored wall will provide the best operation. Although the unit can be used in most brightly lit rooms, it works best if bright lights are not shined directly on the sensors. (Note: Never operate the unit outdoors in daylight as it will not operate properly under such conditions) d. [. . . ]