User manual NADY PMC-3X

[. . . ] To prevent dirt or moisture from damaging your intercom, always wipe the metal part of the plugs with a clean, dry cloth before plugging in. We also suggest that you use a tuner cleaner spray (available at any electronics supply store) to spray the plugs and jacks once a month to keep the contacts clean. SERVICE FOR YOUR NADY COMMUNICATOR (U. S. ) Should your motorcycle communicator require service, please contact the Nady Service Department via telephone at (510) 652-2411 or e-mail to service@nady. com for a Return Authorization (R/A) Number and a service quote (if out of warranty). Make sure the R/A Number is clearly marked on the outside of the package and enclose a cashier's check or money order (if not prepaid with a credit card). [. . . ] 2) Connecting Your Headset: Insert both the driver and passenger headsets in the two Headset Jacks (3). 3) Intercom Only Operation: Flick OFF/INT/FM switch (4) to "INT" position to turn on power. A power LED (5) lights to indicate the unit is in operation. 4) To Adjust Volume Control: Simply press the Volume Up (6) or Volume Down (7) buttons to achieve a comfortable listening level. You are now ready for full duplex, simultaneous two-way conversation. 5) External Music (Aux In) Operation: AUX IN: To add an external music source (Portable Tape/CD player, AM/FM radio) to the PMC-3X, use an ordinary stereo mini-phone plug jumper cable (3. 5mm TRS phone plugs both ends) and insert one end into the AUX IN jack (8). Connect the other end to your external sound source. For proper operation, please verify that the audio source has less then 200mW @ 8 ohms audio output power. Use the volume setting from the sound source to adjust the external audio to a comfortable listening level. 6) FM Radio with Intercom Operation: Flick FM/INT/OFF switch (4) to top "FM" position. Tune in desired FM Station (88-108MHz) with the FM Tuner buttons (11) and (12). Pressing the Top button (11) scans the FM band from 88-108 MHz, and automatically stops at a station. Pressing the top button again scans to the next FM station. Pressing the Lower button (12) resets the FM tuner to 88 MHz. Adjust volume control buttons to volume desired per step four, above. During FM operation, turn the VOX volume (13) to a suitable level for Voice Activated Mute to partially lower the FM sound during conversation. If radio operation only is desired, turn the VOX volume all the way to minimum sensitivity. + Stop here if you do not plan to connect the PMC-3X to an external FRS/GMRS or PMR 2-way radio or cell phone. [. . . ] Using External PTT Cable: To connect the external PTT (push-to-talk) button switch included with the optional OCA-XC/O kit to the PMC-3X, use the external PTT switch cable and insert the plug into the EXT PTT jack (10). The PTT button end can be easily mounted with the Velcro strap attached on your motorcycle's handle bar for convenient control of your 2-way radio's transmission function. (Your 2-way radio must have its VOX turned on to use this feature. ) You cannot use this PTT function with cell phones and do not need to as they are duplex already (simultaneous 2-way conversation like the intercom). (3) (5) (10) (9) (8) (13) (6) (7) (11) (12) (4) (1) (2) Your PMC-3X is now ready for bike-to-bike communication with your riding partner(s) through your existing 2-way radio. [. . . ]