User manual NADY SC-100

[. . . ] We recommend that you read this instruction sheet carefully to get the most out of your new unit. Thanks for selecting NADY AUDIO and the SC-100 as your choice in sequenced power contollers. FEATURES · Convenient 1U rack unit for controlling sequenced AC power, On/Off for up to 10 pieces of audio equipment. The controller provides a gradual turn on process and turns the equipment off in the reverse order. [. . . ] Do not operate for a long period of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist. The product should be positioned so that proper ventilation is maintained. The product should be located away from heat sources such as radiators, heat vents, or other devices (including amplifiers) that produce heat. The product should be connected to a power supply only of the type described in the operating instructions or as marked on the product. Replace the fuse only with one of the specified type, size, and correct rating. The power supply cord should: (1) be undamaged, (2) never share an outlet or extension cord with other devices so that the outlet's or extension cord's power rating is exceeded, and (3) never be left plugged into the outlet when not being used for a long period of time. Care should be taken so that objects do not fall into, and liquids are not spilled through, the enclosure's openings. The product should be serviced by qualified service personnel if: A. The power supply cord or the plug has been damaged. Objects have fallen into, or liquid has been spilled onto the product. The product does not appear to operate normally or exhibits a marked change in performance. The product has been dropped, or the enclosure damaged. Do not attempt to service the product beyond what is described in the user maintenance instructions. All other servicing should be referred to qualified service personnel. FRONT CONTROLS & CONNECTIONS (2) (3) (1) (4) (1) Key Switch On/Off -- On begins the power up sequence. (2) Status LED's for the 10 outlets -- LED is On when the outlet is turned On. [. . . ] For 230 VAC operation use 10A, 250V fuse. 20A 10 channel, 1 second delay 1. 75" x 19" (44mm x 482mm) 16 lbs. (7. 25 Kg) FOR YOUR NADY AUDIO PRODUCT Output connectors: Power control: Dimensions: Weight: SERVICE (U. S. ) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411 or e-mail at service@nady. com. [. . . ]