User manual NAIM UNITI ALL-IN-ONE AUDIO PLAYER REFERENCE GUIDE

[. . . ] REFERENCE MANUAL NAIMUNITI ALL-IN-ONE AUDIO PLAYER ENGLISH C onte nts Section Contents 1 1. 1 1. 2 1. 3 1. 4 1. 5 2 2. 1 2. 2 2. 3 2. 4 2. 5 2. 6 2. 7 2. 8 2. 9 3 3. 1 3. 2 3. 3 3. 4 3. 5 3. 6 3. 7 3. 8 4 4. 1 4. 2 4. 3 4. 4 4. 5 4. 6 4. 7 4. 8 4. 9 5 5. 1 5. 2 5. 3 5. 4 5. 5 NaimUniti Introduction The Integrated Amplifier The CD Player The Multi-mode Radio The UPnPTM Audio Interface The USB/iPod Interface NaimUniti Installation and Connection NaimUniti Rear Panel Mains Power Connection FM/DAB Aerial Connection Audio Signal Connections Speaker Outputs Headphone Output Signal Ground Switch Network Connections Control Sockets NaimUniti Operation Front Panel Features Front Panel Buttons (normal play mode) Front Panel Buttons (list and setup modes) Front Panel Display (normal play mode) Front Panel Display (list mode) Front Panel Display (setup mode) NaimUniti Remote Handset NaimUniti Text Entry NaimUniti Setup The Setup Home Menu The Language Menu The Inputs Menu The Speakers Menu The Headphones Menu The Network Settings Menu The Front Display Menu The Handset Keys Menu The Factory Settings Menu NaimUniti Integrated Amplifier Selecting Inputs Volume Control Amplifier Display Signal Outputs Amplifier Fault Warnings 1 1 1 1 1 1 2 2 2 2 2 3 3 3 3 4 5 5 5 5 6 6 6 7 8 9 9 9 9 10 11 11 12 12 13 14 14 14 14 14 14 iPod, and iTunes are trademarks of Apple Inc. , registered in the U. S. Windows Media is a trademark of Microsoft Corporation. The "Made for iPod" logo indicates that this product has been designed specifically to work with iPod. The manufacturer certifies that this accessory has been made in accordance with the high standards of quality and performance that you expect from iPod and Apple. [. . . ] Use the handset numeric/text keys to enter the passphrase or access key taking care to ensure that the letter case is correct. Press the handset ok/list key when text entry is complete. In the illustration the passphrase is "flatfish". If the network is successfully joined NaimUniti will display a confirmation screen. If an incorrect passphrase or access key is entered NaimUniti will display an alert message. Now enter your wireless passphrase or access key. Press OK to continue 4. 6 The Network Settings Menu The Network Settings menu enables NaimUniti network parameters to be customised to suit the router and network. The options are tabulated and described in the following sections: Parameter Name: Wireless: Status: DHCP: Network Settings 1/4 4Name: Uniti-0131 Wireless: Not Used Status: Not Connected DHCP Yes Options User definable (text entry) Default: Uniti-xxxx Not Used / Wireless Network Names Connected / No Signal / Login Failure / Busy / Etc. Yes / No The Name parameter enables the NaimUniti's default network name to be changed. The Wireless parameter enables a wireless network to be chosen and joined. See Section 4. 6. 1 below for detailed wireless set up notes. Network Status displays the current network connection status. The DHCP parameter enables the NaimUniti network settings to be modified. In most cases, specifying Yes and leaving NaimUniti set to DHCP, will be the appropriate option. See Section 4. 6. 2 below for notes on non-DHCP network connection. Note: Devices installed on a network have an IP address through which they are identified by all the other items on the network. DHCP is a set of rules that enable the automatic allocation of addresses as items are connected (or switched on while connected) to the network. NaimUniti is set up by default to use DHCP. Note: If NaimUniti is connected to the network both wirelessly and via ethernet (wired), the ethernet connection will take priority. flatfish abc Press OK to confirm flatfish| Connected Press OK To Finish Can't Login Press OK To Re-Try Note: As a security measure, a router may also require the NaimUniti's MAC address to be entered before allowing it to join the wireless network. This type of security feature is known as `MAC address filtering'. The NaimUniti MAC address is shown in the `Factory settings > System Status' page. 11 N a im U nit i Setu p Note: The wireless passphrase/access key is created when the wireless router is first set up and could be a word or a series of numbers and letters. If the passphrase/access key is not known, check on the router settings page or with the person who initially set up the router. Note: If a router offers multiple security configurations, NaimUniti will automatically offer only the most secure one. [. . . ] Note: Buffer level indicates the quantity of stored data within NaimUniti and reflects the ability of the network to provide data at the necessary rate. 8. 2 A udio File C o mpatibility The audio files stored on the UPnPTM servers attached to the network may be in MP3, AAC, FLAC, WMA, WAV or Ogg Vorbis formats. Files must be free of any digital rights management playback restrictions such as the Apple iTunes FairPlay system. 8. 3 S canning Se rv e rs and P laying Fi l es When the NaimUniti UPnPTM input is selected a list of available 4Allegro Media Server UPnPTM servers on the network NAS Disk will be displayed. [. . . ]