User manual NAPCO 4100 DATASHEET

[. . . ] · Fingertip (keypad) or Windows PC-programmable · Scheduled Events: Real time clock enables up to 500 scheduled events and holiday schedules. Program to lock/unlock; disable/ enable users; 4 built-in time schedules · Audit Trail with Time/Date Stamp Log: Up to 40, 000 event Audit Trail with printed time/date-stamped log of all electronic activity can be reported from the lock including user entry, unlock/lock events, program mode changes, user entry, keypad lockout, remote release events, unauthorized code attempts, etc. , by using the AL-IR1 (infrared printer), the AL-DTM (data transfer module) or PCI2 (PC interface). Program data transferred to lock via AL-PCII (PC interface) or (AL-DTMII data transfer module). (see back cover) · "First-Manager-in" controls three (3) different features: Passage mode, group of users and relay options · Non-volatile memory of both programming and audit trail activity · Programmable Form C Relay functions for schedules of manual control of CCTV, lighting, ambush function, alarm system, etc. [. . . ] Compliances: Grade I heavy duty cylindrical lockset. UL listed to the 1OC Positive Pressure Specification. Latchbolt is UL listed and 3-hour fire rated. ADA compliant levers. 4500 Mortise Specifications Operation: Authorized digital code or prox technology ID (e. g HID card) enables outside lever to retract latchbolt, deadlocking latch and deadbolt (where applicable). Inside lever is always in passage mode and permits instant egress. Operating Temperature: Weatherproof lock with operating range from -31 degrees below to 151degrees F. Keypad: Rugged weather-resistant all-metal, 12-button programmable for multi-level access functions. Programming: Locking modes, event schedules, group or individual user codes, master and management codes, passage and emergency or service code, lockout and remote override capability and allowable entry time (3, 10 or 15 seconds), etc. are programmable through the keypad, from the Data Transfer Module (AL-DTMII) or using any PC running Alarm Lock DL-Windows Software. Audit Trail: Locks' entry activity log can be polled to the Data Transfer Module (AL-DTMII), any PC using DL-Windows Software, and/or can be on-site printed using the hand-held infrared printer (AL-IR1). Power: 5AA alkaline batteries extended operations, furnished. Also optional AC auxiliary power using 6-12 volt power supply. Audible low battery alert, visual and audible entry indicators, 60. 000 cycles, typical. Door Thickness: Standard I 3/4" (4. 46cm) thickness. (Accepts I 3/8" to 1 7/8" or 3. 5 to 4. 7 cm). Backset: 2 3/4" (7. 01 cm) Door Prep: Standard ANSI 115. 1 Mortise prep. Cylinder: 1 3/8" (3. 5cm) mortise cylinder supplied. 1 3/4" - 1' 1/2" (3. 5 - 3. 82cm) mortise cylinders accepted. Classroom Models are supplied with cylinder with straight cam. Deadbolt Models are supplied with cylinder with cloverleaf cam. Classroom Models: Feature stainless steel latchbolt with 3/4" (1. 91 cm) projection and deadlocking latch. Deadbolt Models: Feature stainless steel deadbolt with 1" (2. 55 cm) projection, latchbolt with 3/4" (1. 91 cm) projection and deadlocking latch. [. . . ] Kit includes DL-WINDOWS software and computer interface cable (required). Note: DL4100/4500 Series Trilogy Locks require DL-WINDOWS Software version 3. 02 or higher. For software upgrade only order part no. AL-IR1 Infrared Printer: Prints the event log and user code with handheld convenience. [. . . ]