User manual NAPCO MAGNUM ALERT 850 SYSTEM

[. . . ] The keypad will display "FIRE SILENCED, followed by "FIRE STATUS", "FIRE ALARM", FIRE DRILL TEST then "FIRE SILENCED". Another alarm will sound the signals Enter code and press [INFO]. The fire signal devices FIRE ALARM RESET should sound. To terminate the test, enter code, then press Enter code and press [INFO]. [. . . ] system trouble, enter code, then press [INFO]. Press [No] until SUPERVISORY ALARM/TROUBLE RESET "DISP SYS TRBL?(YES/NO)" appears, then press [YES]. Enter code and press [INFO]. The keypad will display options one at a time. Press [NO] to continue to scroll options or [YES] to select option. Local Service Representative: ________________________________________________________ Address: _________________________________________________________________________ Telephone Number: ________________________________________________________________ Note: (1) Test system weekly!(2) If panel sounder is on, call for service. (3) A complete functional checkout of the control unit is required following any programming or reprogramming. (4) This page is to be framed and mounted adjacent to the control unit. WI658C 08/99 BASIC OPERATING INSTRUCTIONS FOR THE MA3000 FIRE CONTROL PANEL WITH THE RP3000LCD KEYPAD. Note: Text in quotes indicates a displayed message; messages preceded and followed by asterisks indicate additional related message(s) to follow. Buttons markings are shown in brackets ( [ ] ). STANDBY There are two normal standby conditions for the fire system: Disarmed and Armed. In Normal Disarmed Standby, the keypad will display "SYSTEM READY" with the green STATUS light on (no Burglary Zones faulted) or `ZONE FAULT" with no lights on (a Burglary Zone is faulted). No reminders ("BYPASS"; "FIRE/TBL"; "SYS TBL") will be on. Keypad will continue to display Burglary Zone(s) that initiated the alarm. Press SPRINKLER SUPERVISORY ALARM [RESET] to clear alarm memory. Another alarm will sound the signals Signal devices (bells, horns, etc. ) will not sound. The keypad will sound and display "SUPV ALARM" followed by the number and again. description of the zone in alarm, then "FIRE STATUS", then FIRE ALARM RESET "SPRINK ALARM". This indicates that a device designed to monitor Enter code and press [RESET]. The keypad sounder will silence; the fire alarm system is in alarm. To reset a sprinkler supervisory after a brief delay, the "FIRE/TBL" reminder should clear and the alarm, enter code and press [RESET]. To recall a sprinkler supervisory keypad display should return to "SYSTEM READY" with the green zone still in alarm. STATUS light on (no Burglary Zones faulted) or "ZONE FAULT" with 1. View the menu by entering code and pressing [FUNCTION]. [. . . ] Repeat reset initiating device procedure. However, if the trouble still exists, "FIRE STATUS" will continue to scroll "SPRNK SUPVTRBL". FIRE ALARM TEST Operate a fire alarm initiating device. Signal devices will pulse and To recall the sprinkler supervisory trouble, enter code and press the keypad will display a fire alarm. [. . . ]