User manual NAVIGON 1400

[. . . ] User's manual NAVIGON 14xx | 24xx English (United Kingdom) September 2009 The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-oflife. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste. Imprint NAVIGON AG Schottmüllerstraße 20A D-20251 Hamburg The information contained herein may be changed at any time without prior notification. Neither this manual nor any parts thereof may be reproduced for any purpose whatsoever without the express written consent of NAVIGON AG, nor may they be transmitted in any form either electronically or mechanically, including photocopying and recording. [. . . ] The reported obstructions are also indicated on the route. The route which corresponds best to the selected route profile is marked with "MyRoute". If the MyRoutes function is not activated, only one route is presented. As soon as you tap on a button, navigation along the route in question will start. 4 The current route profile is indicated on the (Route Profile) button. The symbol illustrates the mode of transport on which the profile is based. (Refer to "Route profiles" on page 55) Working with the map - 45 - User's manual NAVIGON 14xx | 24xx Tap on the symbol to select a different route profile. 5 The destination is marked with a little flag. If you display a planned or loaded route, the starting point and each route point will be marked with a little flag. In the case of a multi-leg route, the distance and the estimated driving time for each leg are displayed. Tap on the (Route Profile) button (refer to the figure, point 4) in order to select a different route profile. To start the navigation, tap on the button for the route (see figure, point 3) you want to use for the navigation. If you display a planned or loaded route, the route may be recalculated. The starting point for the calculation will now be your current location. You will first be guided to the first route point entered. Tap on Options > Turn-by-Turn List to view detailed directions for the route. (Refer to "Turn-by-Turn List" on page 65) Tap on (Destination search) in order to view the map in Destination search mode. (Refer to "Map in Destination search mode" on page 53) 7. 4 Map in Navigation mode How you are guided to your destination depends on various factors (the route profile selected, your current location, the type of route planning, etc. ). Your navigation system automatically selects the optimum method. 7. 4. 1 Navigation in Vehicle mode After the route was shown in Preview mode, navigation was started. The map opens in Navigation mode. - 46 - Working with the map User's manual NAVIGON 14xx | 24xx 1 2 3 4 5 Here is shown what signposts should be followed. Possible speed limits may be shown here. When two manoeuvres need to be executed in quick succession, the small arrow box indicates the second manoeuvre to be executed. The large arrow box shows a diagram of the next junction which you should turn on to. The distance remaining to this junction is indicated underneath. As you get closer to the junction you will see a spot diagram in addition to the distance: The nearer you get to the junction, the more yellow spots are displayed. If you don't have to change direction for a long time, you will see only a straight arrow. [. . . ] 30, 34 TMC Preview TMC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Recalculate Route . . . . . . . . . . . . . . . . . . . . . . . . 71 Show. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]