User manual NAVMAN ICN 650

[. . . ] GPS receivers receive signals from these satellites and use the information to determine an exact location. satellites orbit the earth at 20 , 200 kilometres (around 12 , 000 miles). While a GPS receiver can detect signals from up to 12 satellites at any time, only three signals are needed to provide a position or "GPS fix" (latitude and longitude) for vehicle navigation systems. Your iCN GPS antenna receives GPS signals and uses these to calculate your position on the maps stored on its memory card. [. . . ] Use the 4-way toggle to highlight your country and press OK. You can change your country at any time using the Change Country button in the You Are Going To screen. Use the 4-way toggle and the OK button to decide if you want to go to the centre of the area or to find a street within that area. Use the 4-way toggle to move around the Keyboard screen. Use the 4-way toggle to move around the Keyboard screen. To delete a character, press the left Selection Button or select ; hold the left Selection Button to delete the line. When you have entered the first few characters of the name of the place you are seeking, or you can see it on the screen, press the right Selection Button. Character, press the left Selection Button or select ; hold the left Selection Button to delete the line. When you have entered the first few characters of the name of the place you are seeking, or you can see it on the screen, press the right Selection Button. Select whether you want to go to the centre of your destination street or to a particular intersection. In certain countries, you may be able to enter the house number of your destination. To choose a specific point on the Destination screen as your destination, use the 4-way toggle to highlight the map and press OK. Use the 4-way toggle to point the cursor at your destination and press OK. Your iCN will automatically update your destination to that point. Press the right Selection Button to confirm that you wish to go to this destination. Your iCN will calculate your route, and guide you on your journey. Press the left Selection Button to return to the previous screen without calculating a route. NOTE: You can save this destination as a Favourite; use the 4-way toggle to select Save and press OK. Map of entire route The Instruction List screen displays all of the turns of your route, the turn direction, the street name and the distance to the turn. A route must have been calculated for this screen to be able to display. the screen shows three turns at a time. The route can be scrolled through using the up and down buttons on the 4-way toggle. [. . . ] change the brightness setting on the Display screen. Follow the Address Search Rules opposite when entering addresses. Only enter the first few characters of the street you are seeking, and then use the Select Street screen to find it. ensure that your GPS antenna is in the horizontal position. [. . . ]