User manual NAVMAN TRACKER 5100

[. . . ] TRACKER 5500, 5500i 5100 and 5100i CHARTPLOTTERS Installation and Operation Manual English . . . . . . . . . . . . . 79 TRACKER 5100i TRACKER 5500 w w w. c o m TRACKER 5500i TRACKER 5100 NAVMAN FCC Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a normal installation. [. . . ] To insert a waypoint at the end of the route, select the unused leg at the end of the list of waypoints. Otherwise, select the waypoint to insert the new waypoint in front of. As waypoints are inserted, the distance and bearing of each leg is shown automatically. If the route has more waypoints than will fit on the display, press or to see them. 5 To remove a waypoint from the route: i Select the waypoint to remove. 6 Repeat this process until the route is finished. 8 Display the route on the chart (see section 102-3) and check that the route does not cross land or dangerous water. 10-2-2 Editing a route Editing a route from the chart 1 In the routes display, select the route to edit. 2 The selected route is displayed on the chart, with a circle around the first waypoint. 3 Edit the route as described in section 10-2-1 A, starting at step 4. Editing a route from the routes display 1 In the routes display, press or to highlight the route to edit. The selected route is displayed: the route name and a list of the waypoints. Edit the route as described in section 10-2-1 B, starting at step 3. 2 3 10-2-3 Displaying a route on the chart This goes to the chart display, and shows the selected route at the centre of the display. 1 In the routes display, press or to highlight the route to display. It returns to the chart display, with the selected route displayed. 2 10-2-4 Deleting a route 1 In the routes display, press or to highlight the route to delete. In the routes display, press MENU and select Delete all. Select Yes to confirm. 2 1 2 10-2-5 Deleting all routes 10-3 Navigating a route 10-3-1 Starting a route To start the boat navigating along a route: 1 In the routes display, press or to highlight the route to use. The TRACKER asks for the direction to traverse the route. Select Forward (the order the route was created) or Reverse. 3 It displays a chart with the route marked and starts navigating from the start of the route. 10-3-2 Skipping a waypoint in a route To skip a waypoint when the boat is navigating along a route: In the chart display, press MENU and select Skip. The TRACKER starts navigating straight towards the next waypoint on the route. Warning: Skipping a waypoint with the autopilot on might result in a sudden course change. 2 10-3-3 Cancelling a route To stop the boat navigating along a route: In the chart display, press MENU and select Cancel route. NAVMAN TRACKER 5100/5100i/5500/5500i Installation and Operation Manual 23 11 User card display A C-MAPTM user card is an optional plug-in card that can store data files (see section 1-2). There are three types of files: waypoints, routes or a track. [. . . ] Box 68 155 Newton, Auckland, New Zealand. Ph: +64 9 481 0500 Fax: +64 9 480 3176 e-mail: marine. sales@navman. com Website: www. navman. com ASIA China Peaceful Marine Electronics Co. Hong Kong, Guangzhou, Shanghai, Qindao, Dalian. E210, Huang Hua Gang Ke Mao Street, 81 Xian Lie Zhong Road, 510070 Guangzhou, China. [. . . ]