User manual NAVMAN TRACKER 5605

[. . . ] Pilot 3380 Tracker 5505/5605 AU C H A R T PT LO O P T I T L E O R T Installation and Operation Manual www. navman. com NAVMAN ! IMPORTANT SAFETY INFORMATION Please read carefully before installation and use. WARNING This is the safety alert symbol. It is used to alert you to potential personal injury hazards, Obey all safety messages that follow this symbol to avoidpossible injury or death. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury CAUTION indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury. [. . . ] 8 5 Enter the comfortable maximum RPM you know you can achieve for the engine rather than the maker's value. The TRACKER then asks you to set the minimum RPM. Set the throttle to idle; on a multi engine boat set all engines to about the same idle RPM. The TRACKER repeats the above step to record data up to the maximum RPM. Then the TRACKER asks if you want to save the curve. The fuel computer asks for a name for the curve. The TRACKER stores the new curve. 6 Note To interrupt making the curve at any time, press . TRACKER 5505/5505i/5605 Installation and Operation Manual NAVMAN 35 10-6-2 Managing fuel consumption curves Renaming a curve 1 2 Press one or more times until the Setup menu is displayed, then select Fuel. Select Name and select the name of the curve to rename. Select Rename and press the name. Using a curve Compare your boat's performance now, at the current RPMs, with the boat's performance when you made the curve. You can compare your boat's performance now with a curve made under ideal conditions or with a curve made under similar conditions. Information in a curve A RPM of the boat now. For a twin engine boat, the RPM is the average of the two RPMs. Red curve: boat speeds at different RPMs recorded when you made this fuel consumption curve. This marker is below the red curve, showing that the boat speed now at this RPM is less than when you recorded the curve. 3 . Change 10-6-3 Using fuel consumption curves Deleting a curve 1 2 Press once or more until the Setup menu is displayed, then select Fuel. Select Name and select the name of the curve to delete. Select Delete. C 3 1 2 Selecting a curve You must make a fuel consumption curve before you can use it (see section 10-6-1). On the Fuel display, press , select Fuel consumption curve and select the name of the curve to use. On the fuel display, press if necessary to select Fuel curve and display the fuel consumption curve. On a multi engine boat, keep the RPM of all engines similar while using a curve. The shape of the curve depends on the type of speed sensor you selected when making the curve (see sections 10-5-1 and 10-5). More information about fuel consumption curves is available in Navman's Diesel flow sensors installation and operation manual. D Blue curve: fuel consumption at different RPMs recorded when you made this fuel consumption curve. [. . . ] A-98, Sector 21, Noida - 201 301, India. Ph: +91 120 244 2697 TeleFax: +91 120 253 7881 Mobile: +91 98115 04557 e-mail: vkapil@del3. vsnl. net. in Esmario Export Enterprises Block No. F-1, 3rd Floor, Surya Towers Sardar Patel Rd, Secunderbad 500 003. Ph: +91 40 2784 5163 Fax: +91 40 2784 0595 e-mail: gjfeee@hd1. vsnl. net. in web: www. esmario. com Korea Kumhomarine Technology Co. [. . . ]