User manual NEC 2000

[. . . ] Digital Talk 2000 Owner's Manual ATTENTION Before Using the Phone: It is necessary that you fully CHARGE the phone battery before attempting to make or receive a call. Battery Disposal: DO NOT PLACE USED BATTERIES IN YOUR REGULAR TRASH. THIS NICKEL-CADMIUM (Ni-Cd) BATTERY MUST BE COLLECTED, RECYCLED OR DISPOSED OF IN AN ENVIRONMENTALLY SOUND MANNER. : Battery Recommendations: The NEC Digital Talk 2000 Series IS-136 TDMA cellular phone you have purchased is designed to deliver quality performance and provide you with years of use. To maintain optimum performance, NEC recommends only using NEC Authentic Accessories with all NEC cellular phones. The incineration, landfilling, or mixing of nickel-cadmium (Ni-Cd) batteries with any municipal solid waste stream is PROHIBITED BY LAW in most areas. [. . . ] FULL MUTE - In the portable configuration, this function switches off both the microphone and the earpiece while in the conversation mode. This switches off the microphone. D H DB 03m 06s Mic Mute -32- 2) Press FCN + 9. This switches the microphone back on. D H DB 03m 06s In Use FULL MUTE: 1) Press FCN + 9 (Hold) This switches off both the microphone and earpiece or speaker. D DDB H 03m 06s Full Mute 2) Press FCN + 9. This switches the microphone, earpiece and speaker back on. D DDB H 03m 06s In Use LOW BATTERY ALARM The Low Battery Alarm warns the user when the battery power is getting low, by emitting a short double tone. The double tone will sound 6 times at 10 second intervals and the display will show RECHARGE BATTERY. After the sixth consecutive alarm tone, the phone shuts itself off. RECHARGE BATTERY If you have a call in progress, the phone terminates the call and turns off the phone automatically. The phone may sense the battery low right after power on. In this case, it will turn off the phone immediately. -33- ALARM CLOCK, AUTO POWER ON, AND AUTO POWER OFF FUNCTION The alarm clock function allows the user to set the time at which the phone alarm sounds with the phone alarm being used as an alarm clock. The phone powers on automatically if the power is off at the alarm set time. The clock alarm operates only once; therefore, it is necessary to reset the phone alarm clock for the next necessary alarm time. The clock alarm sounds for 20 seconds unless the [CLR] key is pressed. If the phone is powered on at the alarm set time, the alarm still sounds. If any key except [CLR] is pressed, the alarm continues for 20 seconds and phone remains powered on. Setting the Alarm: 1) Press FCN + 2. D H B flashing ON - - : - OFF - - : - ALM - - : - - 2) Press VOL. The Alarm Icon appears on the screen and the flashing indicator moves to the hour field. (01 to 12 are valid entries for hours. ) D H B ON - - : - OFF - - : - ALM 12 : 00 a flashing Alarm Icon 3) Enter Alarm Time (i. e. , 11). Press MEM anytime the hour or minute fields are flashing to change to either am or pm. D H B ON - - : - OFF - - : - ALM 11 : 00 a flashing -34- 4) Press VOL. The flashing moves to the minutes field. D H B ON - - : - OFF - - : - ALM 11 : 00 a flashing 5) Enter Alarm Time (i. e. , 31). (00 to 59 are valid entries for Minutes. ) D H B ON - - : - OFF - - : - ALM 11 : 31 a flashing 6) Press VOL. [. . . ] REV: LW012097 -76- TECHNICAL INFORMATION Dimensions Weight Transmitting Power Operating Voltage Frequency Band Standard Battery Capacity Number of Channels Memory Locations Memory Capacity 160x50x30mm* (6. 3"x2. 0"x1. 2") 10. 0 ounces 0. 6 W max. battery) 824. 040 - 848. 970 MHz (TX) 869. 040 - 893. 970 MHz (RX) 1200 mAh 832 99 Numeric 32 digits per location Alpha: 10 letters per location LICENSED UNDER ONE OR MORE OF THE FOLLOWOING U. S. PATENTS 4, 954, 951 4, 396, 976 4, 739, 396 4, 942, 516 4, 371, 923 4, 675, 863 4, 896, 260 4, 121, 284 4, 817, 089 4, 829, 419 4, 120, 583 4, 912, 705 4, 825, 364 4, 435, 732 5, 022, 024 4, 686, 622 4, 471, 385 5, 121, 391 4, 531, 182 4, 672, 457 -77- NEC SERVICE SUPPORT NEC's Service Support group is ready to assist you with any additional information that you may need in the operation and integration of your NEC Cellular Telephone and NEC Authentic Accessories. Service Support can be obtained by contacting NEC at: Telephone: 1-800-637-5917 * 1-972-751-7500 Writing: NEC America, Inc. [. . . ]