User manual NEC 2600

[. . . ] NEC 2600 Owner's Manual NEC 2600/2610 Quick Reference Guide Battery The phone battery should be charged before being used for the first time. for approximately two seconds to turn on the phone. Turn On Phone Press and hold the P key for approximately two seconds to turn off the phone. Turn Off Phone Press and hold the P key the contents of the menus and submenus. Select a menu item by pressing either M when the item is highlighted or by pressing the corresponding menu item number. Access and Navigate Menus Press M to display the main menu. Press I to view Standby Mode Once the phone is powered on, the phone enters the standby mode. The phone stays in the standby mode until a call is placed or received, a menu is accessed, or the phone is powered off. Use the keypad to enter a name associated with the phone number; press M. [. . . ] Press the appropriate corresponding phone key to hear a setting. Press E to save the selected setting and exit the ring type menu. Menu Shortcut Network M45 Voice Privacy M451 Menu Shortcut Voice privacy is an enhanced security feature available through some digital cellular service providers. Voice privacy encrypts or scrambles the voice channel to ensure a telephone conversation is secure and private. For your phone to utilize the cellular service provider's enhanced voice privacy feature, the voice privacy setting in your phone must be turned on. To set the voice privacy selection, press M451. Press 1 -33- to turn off voice privacy capability and notifications or press 2 to turn on voice privacy capability and notification. When sending a call, VPActive is displayed if the voice privacy selection is turned on, enhanced voice privacy is available through the cellular service provider, and voice privacy security is active for the call in progress. When sending a call, VPInactive is displayed if the voice privacy selection is turned on; but voice privacy is not available through the cellular service provider or voice privacy security is inactive for the call in progress. Contact your cellular provider for the availability of voice privacy. Select Phone Number M452 Menu Shortcut Your phone can be programmed with up to two phone numbers. If two phone numbers are programmed into the phone, you can select the desired phone number to use by pressing M452. Press I to highlight the phone number selection (No. 1 or No. Press E to exit the select phone number menu. Activate Network M453 Menu Shortcut As described in "7. Non Public Mode" on page 40, your phone is capable of operating on a private or residential telephone system in addition to operating on a cellular network system. If you subscribe to more than one system, you can turn on or off access to the public, residential, or private system by pressing M453. As prompted, enter the 4-digit password (see "Phone Password" on page 3). Press I to highlight the network activation selection. Press M or the corresponding number (1, 2, or 3) to enable or disable access to each system. The phone automatically powers off and then powers on again with the selected network(s) activated. Note that if no selection changes are made, the phone does not power off and power on again when E is pressed. -34- Network Priority M454 Menu Shortcut If you subscribe to more than one system as described in "Activate Network" on page 34, you can prioritize access to residential, private, and public systems by pressing M454. The systems are displayed in the currently selected priority order. Press I to highlight the systems listed in the number two or number three positions. Press M once to move the selected system up one level in priority. [. . . ] Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. (c) NECAM's total liability for damages for any cause related to or arising out of the use or inability to use the product, whether in contract, negligence, strict tort, or based on any other legal theory, shall not exceed the original price paid for the product. (d) In no case shall NECAM be liable for any indirect, special, incidental, or consequential damages based upon breach of warranty, breach of contract, negligence, strict tort, or any other legal theory. Such damages include, but are not limited to, loss of profits, loss of savings or revenues, -59- 7. inability to use the products or any associated equipment, cost of capital, cost of any substitute equipment, facilities or services, claims by third parties other than you, and injury to property. [. . . ]