User manual NEC 42VM5VP5

[. . . ] PlasmaSync Plasma Monitor Operation Manual For the specifications of your plasma monitor, refer to "Model Information". NEC Solutions (America), Inc. Important Information Precautions Please read this manual carefully before using your plasma monitor and keep the manual handy for future reference. Do not use this unit's polarized plug with extension cords or outlets unless the prongs can be completely inserted. Do not expose the unit to water or moisture. Avoid damage to the power cord, and do not attempt to modify the power cord. [. . . ] Example: Setting "3" Set "ADVANCED OSM" to "ON" in the MAIN MENU (1/2), then perform the following operations. On "GAMMA" of "PICTURE" menu, select "3". PICTURE PREVIOUS PAGE COLOR TEMP. : GAMMA : LOW TONE : COLOR TUNE 2/2 MID 3 AUTO Adjusting the colors Use this procedure to adjust hue and color density for red, green, blue, yellow, magenta and cyan. You can accentuate the green color of trees, the blue of the sky, etc. Example: Adjusting the color tune for blue Set "ADVANCED OSM" to "ON" in the MAIN MENU (1/2), then perform the following operations. On "PICTURE" menu, select "COLOR TUNE", then press the MENU/ENTER button. The "COLOR TUNE" screen appears. On "BLUE" of "COLOR TUNE", adjust the color tune. COLOR TUNE RED GREEN BLUE YELLOW MAGENTA CYAN RESET SEL. ADJ. SEL. ADJ. EXIT RETURN : OFF EXIT RETURN Information GAMMA settings The picture becomes darker as the number increases (in the sequence of 1, 2, 3, 4). Information COLOR TUNE settings RED: Makes red's adjustment GREEN: Makes green's adjustment BLUE: Makes blue's adjustment YELLOW: Makes yellow's adjustment MAGENTA: Makes magenta's adjustment CYAN: Makes cyan's adjustment RESET: Resets settings to the factory default value. and buttons to select "ON", then press the Use MENU/ENTER button. 19 Audio Settings Menu Adjusting the treble, bass and left/right balance and audio input select The treble, bass and left/right balance can be adjusted to suit your tastes. Example: Adjusting the bass On "BASS" of "AUDIO" menu, adjust the bass. AUDIO BASS TREBLE BALANCE AUDIO INPUT1 AUDIO INPUT2 AUDIO INPUT3 Image Adjust Settings Menu Adjusting the Position, Size, Fine Picture, Picture Adj The position of the image can be adjusted and flickering of the image can be corrected. Example: Adjusting the vertical position in the normal mode On "V-POSITION" of "IMAGE ADJUST" menu, adjust the position. The mode switches as follows each time the or button is pressed: NORMAL FULL : : : VIDEO1 HD/DVD1 RGB1 SEL. ADJ. EXIT RETURN Note : If "CAN NOT ADJUST" appears. . . Set "AUDIO INPUT" on the AUDIO menu correctly. Information Audio settings menu BASS: Controls the level of low frequency sound. TREBLE: Controls the level of high frequency sound. BALANCE: Controls the balance of the left and right channels. * The mode can also be switched by pressing the WIDE button on the remote control. * The settings on the IMAGE ADJUST menu are not preset at the factory. IMAGE ADJUST ASPECT MODE : NORMAL V-POSITION H-POSITION V-HEIGHT H-WIDTH AUTO PICTURE : OFF FINE PICTURE PICTURE ADJ. ADJ. V-POSITION +64 Setting the allocation of the audio connectors Setting the AUDIO 1, 2, and 3 connectors to the desired input. Example: Setting "AUDIO INPUT1" to "VIDEO 2" On "AUDIO INPUT1" of "AUDIO" menu, select "VIDEO2". The available sources depend on the settings of input. AUDIO BASS TREBLE BALANCE AUDIO INPUT1 AUDIO INPUT2 AUDIO INPUT3 Information When "AUTO PICTURE" is "OFF" IMAGE ADJUST ASPECT MODE : FULL V-POSITION H-POSITION V-HEIGHT H-WIDTH AUTO PICTURE : OFF FINE PICTURE PICTURE ADJ. ADJ. : : : VIDEO2 HD/DVD1 RGB1 SEL. ADJ. EXIT RETURN Information AUDIO INPUT A single audio input cannot be selected as the audio channel for more than one input terminal. When Auto Picture is off, the Fine Picture and the Picture ADJ. [. . . ] Repair or attempted repair by anyone not authorized by NEC Solutions. Any shipment of the product (claims must be presented to the carrier). Any other cause which does not relate to a product defect. Burns or residual images upon the phosphor of the panel. [. . . ]