User manual NEC 50XM6

[. . . ] Please read this manual carefully before using your plasma monitor and keep the manual handy for future reference. Use only with 100 V to 240 V 50 Hz/60 Hz AC power supply. Continued operation at line voltages greater than 100 V to 240 V AC will shorten the life of the unit, and might even cause a fire hazard. Handle the unit carefully when installing it and do not drop. [. . . ] This function can be used when using the monitor with a computer. * If the computer's power is not turned on or if the computer and selector tuner are not properly connected, the system is set to the off state. * For instructions on using the computer's power management function, refer to the computer's operating instructions. Power management settings ON: In this mode the power management function is turned on. OFF: In this mode the power management function is turned off. Power management function and POWER/ STANDBY indicator The POWER/STANDBY indicator indicates the status of the power management function. Reducing image retention The brightness of the screen, the position of the picture, positive/negative mode and screen wiper are adjusted to reduce image retention. Synchronizing signals are present from the computer. horizontal and/or Operate the keyboard or vertical synchronizing mouse. The picture signals are not sent reappears. Information PLE settings AUTO: The brightness of the screen is adjusted automatically to suit the picture quality. lOCK1 , 2 , 3: Sets maximum brightness. The brightness level decreases in the order of LOCK 1, 2, 3. ORBITER Use this to set the picture shift. INVERSE Use this to set the inverse mode or to display a white screen. This is the default setting when RGB is input. AUTO1: The picture moves around the screen intermittently, making the picture smaller. This is the default setting when a Video or a DVD/HD/DTV signal is input. Set to "OFF" when these signals are not used. AUTO2: The picture moves around the screen intermittently, making the picture bigger. * When a Video or a DVD/HD/DTV signal is input, the AUTO1 and 2 functions will affect only the moving picture and will not make the screen smaller or bigger. adjust the ORBITER function manually Set the amount of shift and the time between movement. [. . . ] Any other damages whether incidental, consequential or otherwise. Some states do not allow limitation on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you. HOW STATE LAW RELATES TO THE WARRANTY This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR We will pay labor and material expenses for covered items, but we will not pay for the following: These costs are the responsibility of the NEC Corporation of America dealer from whom the product was purchased. [. . . ]