User manual NEC D400

[. . . ] General safety Observe `Turn off 2-way radio' signs, such as those near stores of fuel, chemicals or explosives. Do not allow children to play with the phone, charger or batteries. A small rubber bung (for antenna socket protection) is included in the carton. Keep this out of reach of small children, for whom it could be hazard. [. . . ] If you insert a SIM card other than your own, information such as call logs may be lost. If you missed calls while you were away from your phone but it was switched on, the screen will display the number of missed calls (unless it was just once and then it will display the word CALLED) and allow you to view the unanswered call list by pressing the key. When the answered or unanswered number is highlighted, pressing the key will allow you to store the number, see page 30. To clear the answered and unanswered call list, see page 30. Answered & Unanswered calls - viewing/calling To view information on answered and unanswered calls, proceed as follows: * * * * Press MENU 2. Press 1 to select unanswered calls or 2 to select answered calls. Use the or MENU keys as appropriate to scroll through the information. Use the or previous number as appropriate. To call the number displayed, press the MENU key so the number or name is highlighted. The call will be made. O O 29 Clearing call lists This facility clears the Redial, Answered and Unanswered call lists simultaneously. IF YOU WANT TO: IF YOU WANT TO: IF YOU WANT TO: Clear the call lists now * Press MENU 2 4 2. Automatically clear the call lists when you switch off your phone * Press MENU 2 4 1 1. Turn the automatic clear call list function off * Press MENU 2 4 1 2. O If you turn your phone off by removing its battery, the call lists will not be cleared automatically, even if Auto clear is set to on. Storing numbers & names (ADN & FDN) You can store a telephone number in a directory when it is displayed in any of the following screens: l l l O O It is best to store numbers using the international number format (see page 9). When the personal directory (ADN) is displayed, the word Personal will be at the top of the screen. When the directory is displayed, the word Fixed will be shown. When the SDN directory is displayed, the word Service will be shown. ADN and FDN numbers can be stored with ?'s instead of some digits. They are treated as wildcards and allow several similar numbers to be stored in the same location. If one touch dialling is set to on (see page 35), the first 9 locations in your personal directory will be your one touch numbers (see page 31). Standby screen Redial, Answered & Unanswered viewing logs Flash or text messages (see page 51 for details of these messages) If the standby screen has no number in it, key in the number to be stored. With a telephone number displayed in one of the above screens, press the name. The * * * * * Key in the name you wish to associate with the phone number (see page 37 for text entry details) and press the memory location screen will now be displayed. O O Press the or key ONLY if you wish to enter the number and name in the selected directory. If you select the FDN directory you will have to enter your PIN 2 code to continue (for security code details, see page 41). To store the number in the next available location, press the key. To store the number in a specific location, either key in the location number required or use the or MENU key to select it and then press the key. [. . . ] 2 2 2 2 Caring for batteries 12 Display information . 3 Activating the Flip for call control . 3 Activating the Auto key lock function . 13 Selecting features 14 Menu selection . [. . . ]