User manual NEC HT1000

[. . . ] HT1000 Entertainment Projector User's Manual English Deutsch Français Italiano Español Svenska IMPORTANT INFORMATION Safety Cautions Precautions Please read this manual carefully before using your NEC HT1000 Projector and keep the manual handy for future reference. Your serial number is located on the bottom of your projector. Record it here: CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. [. . . ] See also page E-35. NOTE: This option is not available for selection unless a PC card is inserted properly. Selecting "Execute" displays the file you selected. When you select a JPEG or BMP file and press the ENTER button on the remote or the cabinet, or "Execute" on the above, you will get a toolbar. This toolbar is used to return to the PC Card Files screen. Close Return Return . . . . . . . . . Close the toolbar. E-29 USING ON-SCREEN MENU Basic Menu Operation Using the Menus 1. Press the MENU button on the remote control or projector cabinet to display the Basic, Advanced or Custom Menu. Press the SELECT buttons on the remote control or the projector cabinet to highlight the menu for the item you want to adjust or set. Press the SELECT button or the ENTER button on the remote control or the projector cabinet to select a submenu or item. Adjust the level or turn the selected item on or off by using SELECT or buttons on the remote control or the projector cabinet. The on-screen slide bar will show you the amount of increase or decrease. Changes are stored until you adjust it again. ENTER . . . . . . . . . . Return to the previous screen without storing settings or adjustments. Repeat steps 2-5 to adjust an additional item, or press the CANCEL button on the projector cabinet or the remote control to quit the menu display. The default Custom Menu items are: Source Select (Video, S-Video, Component, RGB, DVI (DIGITAL) and Viewer), Volume, Image Options (Aspect Ratio and Zoom Position), Picture Management, Projector Options (3D Reform, Menu, Setup and Screen), Tools (Sleep Timer, Capture and PC Card Files) and Help (Contents and Information). NOTE: Once you have selected OK on the Custom Menu Edit screen, you cannot cancel the changes on the Menu screen. However, you can reedit the menu items over again as described in the steps above. NOTE: If the "Advanced Menu" item has been selected on the Menu mode, you get the "Confirmation Change Menu" upon completion of "Custom Menu" editing. In this case, selecting "Yes" then "ENTER" will close all the menus and apply the changes from the Advanced menu to the Custom Menu. If you select "No" then "ENTER" functions, then all menu items will return to the Advanced menu, but your changes will still be available within the "Custom Menu" selection. To display the previously tailored Custom Menu, select "Custom Menu" from the "Menu Mode". An item "To Advanced Menu" will be added to the bottom of the Custom Menu. Selecting this item and pressing the ENTER button will display the "Advanced Menu" features. Customizing the Menu The Custom menu can be customized to meet your requirements. Selecting a menu item from the "Custom Menu Edit" list, allows you to custom tailor the menu items to your needs. 1. Select "Custom Menu Edit" to display the "Custom Menu Edit" screen. Use the SELECT or buttons to highlight your selection and press the ENTER button to place a check mark next to an option. Press the ENTER button again to clear the check box. [. . . ] Service Options: There are 3 types of "Service" available. Enduser has to understand following condition and is required to fill in the Application Sheet. 1) Repair and Return: The 'Faulty unit' is sent or collected from the customer. It is repaired and returned within 10 days to the customer, excluding transport time. [. . . ]