User manual NEC LCD2090UXI

[. . . ] To learn about other special offers, register online at www. This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit. This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. [. . . ] Selecting the factory preset allows the user to reset most of the OSM control settings back to the factory settings. This mode changes the display's screen image from color to grayscale. MANUAL: To rotate the OSM, press the ROTATE OSM button when the OSM is not showing. Use the SCREEN SAVER to reduce the risk of image persistence. MOTION (Default OFF): Screen image is reduced to 95% size and moves periodically in 4 directions in order to reduce the risk of image retention. Screen image can be set to move periodically in intervals from 10 to 900 seconds in 10 second increments. GAMMA (Default OFF): When OFF, the GAMMA selection that is used by the display is the same as what is selected in Tag5 (page 20). When ON is selected, the GAMMA curve is narrow, reducing the contrast and cutting down the risk of image retention. NOTE: SCREEN SAVER does not function when the TILE MATRIX function is enabled. When the SCREEN SAVER is on and the monitor is set to the recommended resolution, the screen image will be reduced to 95% and appear slightly less sharp than normal. vIDEO BAND WIDTH (Analog input only): Adjusts the bandwidth of the video signal. Can be used to eliminate undesired video noise from a poor signal. Try this option if the FINE adjustment does not successfully eliminate the noise. sOG THRESHOLD (Analog input only): Adjusts the sensitivity of the Sync On Green input signals. Adjusts the slice level when separating a synchronization from Sync On Green signal input. press "Left" or "Right" to select. EDGE LOCK: Operating your monitor at a non-standard timing may cause images to appear darker than normal or to have color distortion. Use of the Edge Lock control will adjust images to their normal state. the "TILE MATRIX" feature allows one image to be displayed over multiple screens. This feature can be used with up to 25 monitors. (5 horizontal x 5 vertical) Using the Tile Matrix function requires the PC output signal to be sent through a distribution amplifier to each of the individual monitors. TILECOMP: Works in tandem with "TILE MATRIX" to compensate for the bezel width of the tiled monitors in order to accurately display the image. [. . . ] Com Country-specific recycling programs can also be found at: Sweden - http://www. Less than Less than 50W 1W 1W LED color Green or Blue Amber Unlit We hereby certify that the color monitors MultiSync® LCD2090UXi (L205GR) MultiSync® LCD2190UXi (L215GV) are in compliance with Council Directive 73/23/EEC: ­ EN 60950-1 Council Directive 89/336/EEC: ­ EN 55022 ­ EN 61000-3-2 ­ EN 61000-3-3 ­ EN 55024 and marked with Within the European Union EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste. This includes monitors and electrical accessories, such as signal cables or power cords. When you need to dispose of your NEC display products, please follow the guidance of your local authority, or ask the shop where you purchased the product, or if applicable, follow any agreements made between yourself and NEC. [. . . ]