User manual NEC LCD93VXM

[. . . ] To learn about other special offers, register online at www. This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit. This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. [. . . ] Unlike CRT monitors, LCD monitors' image persistence is not permanent, but constant images being displayed for a long period of time should be avoided. to alleviate image persistence , turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image. nOTE: As with all personal display devices , NEC Display Solution of America , Inc. Recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use. Your eyes should look slightly downward when viewing the middle of the screen. Position your monitor no closer than 16 inches and no further away than 28 inches from your eyes. Rest your eyes periodically by focusing on an object at least 20 feet away. Adjust the monitor tilt so that ceiling lights do not reflect on your screen. If reflected light makes it hard for you to see your screen, use an antiglare filter. Use a document holder placed close to the screen. Position whatever you are looking at most of the time (the screen or reference material) directly in front of you to minimize turning your head while you are typing. ergonomics To realize the maximum ergonomics benefits , we recommend the following: · Use the preset Size and Position controls with standard signals · use the preset Color Setting · Use non-interlaced signals with a vertical refresh rate between 60-75Hz · Do not use primary color blue on a dark background, as it is difficult to see and may produce eye fatigue to insufficient contrast. cleaning the LCD Panel · When the liquid crystal panel becomes dusty or dirty, wipe grntly with a soft cloth. Do not rub the LCD panel with coarse or hard material. Do not apply pressure to the LCD surface · Dampen a soft cloth with water and a neutral detergent. Gently wipe the cabinet then dry gently with a soft cloth. Do not touch rubber or vinyl to the cabinet for a long period of time. These type of fluids and fanrics can cause the paint to deteriorate crack or peel. For more detailed information on setting up a healthy work environment, write the American National Standard for Human Factors Engineering of Visual Display Terminal Workstations ­ ANSI-HFS Standard No. Some systems may not support 720 x 400*1 : VGA text 640 x 480*1 at 60 Hz to 75 Hz all modes listed. *1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. [. . . ] All required information concerning the disposal of the product and country-specific information can be found on our following websites: USA: http://www. 33W Less than 2W Less than 1W LED Color Green Amber Unlit Power Consumption Approx. 28W Less than 2W Less than 1W LED Color Green Amber Unlit 39W Less than 2W Less than 1W LED Color Green Amber Unlit Power Consumption Approx. 32W Less than 2W Less than 1W LED Color Green Amber Unlit We hereby certify that the color monitor LCD73VXTM (L175GZ), LCD93VXTM (L195GY) or LCD73VXMTM (L175GZ), LCD93VXMTM (L195GY) is in compliance with Council Directive 73/23/EEC: ­ EN 60950-1 Council Directive 89/336/EEC: ­ EN 55022 ­ EN 61000-3-2 ­ EN 61000-3-3 ­ EN 55024 and marked with Within the European Union EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products carrying the mark (left) must be disposed of separetly from normal household waste. [. . . ]