User manual NEC MOBILEPRO 700 QUICK GUIDE

[. . . ] Using this Guide This guide introduces you to the NEC MobileProTM Handheld Personal Computer (H/PC) hardware. Chapter 1, Quick Start, provides all the information you need to getting your MobilePro 700 setup and working with your desktop or notebook system. Chapter 2, Getting Familiar, introduces you to MobilePro H/PC (also called the MobilePro) features, battery installation, the display panel, and unit care. Chapter 3, Using the MobilePro, shows you how to power on and off, make display panel adjustments, connect external devices, and more. [. . . ] Do not push any foreign objects into the MobilePro bays, connectors, and slots. Avoid using the unit or AC adapter for extended periods in direct sunlight. Do not use the unit in humid or dusty environments. Turn off MobilePro power before cleaning it. Avoid exposing the MobilePro or AC adapter to extreme changes in temperature or humidity. If it is unavoidable, allow your MobilePro to adjust to room temperature before use. When cleaning the system, use a soft, clean, dry cloth. Avoid wiping the display surface with abrasive material, including rough fabric. Do not use a cleaning solution; this may damage the plastic. If the AC adapter becomes extremely hot, unplug the adapter and let it cool. Keep the AC adapter away from the IrDA port to ensure stable communication/transfer operations. Storage Requirements Store the MobilePro and AC adapter in an environment that meets the following conditions: Maintain storage temperatures between 14°F and 140°F (­10°C and 60°C). CAUTION If the temperature of the MobilePro suddenly rises or falls (for example, when you move the system from a warm place to a cold place) vapor condenses inside the system. Turning on the unit under this condition can damage the internal system components. Before turning on the MobilePro, wait until the unit's internal temperature equalizes with the new environment and any internal humidity can evaporate. Keep the storage area free from vibration and magnetic fields. Keep the unit and its components away from organic solvents or corrosive gases. Avoid leaving the unit and its components in direct sunlight or near heat sources. Routine Cleaning Clean or dust your system as follows. CAUTION Never use harsh solutions, household cleaners, or spray cleaners that contain caustic materials on the MobilePro. These cleaners are usually high in alkalinity, which is measured in pH. Using these cleaners can cause the plastic surface to crack or discolor. Touch Panel screen -- Carefully wipe the LCD screen with a soft cloth or a screen wipe designed for that purpose. Special screen wipes are available through your local computer dealer. Unit case -- NEC recommends that you carefully wipe the case with a slightly damp, almost dry cloth. Using the MobilePro This chapter details how to use the MobilePro hardware. [. . . ] If you have problems, check the information in the following table for possible solutions. Troubleshooting Problem Check the main batteries. Resolution Check the back-up battery. The MobilePro has no power. If you are using an AC adapter, make sure the connections are correct and secure. Make sure the battery bay cover lock is in the locked position. Check that the ROM bay cover is properly secure. Try pressing the Power button again (the unit might have turned itself off if it was not used for a specified time). Nothing appears on the screen. Adjust the contrast. Check the power connections. Problem Try replacing the batteries. [. . . ]