User manual NEC MT1045E

[. . . ] MultiSync MT840E/MT1040E/MT1045E LCD Projector User's Manual English IMPORTANT INFORMATION Precautions Please read this manual carefully before using your NEC MultiSync MT840/MT1040/MT1045 Projector and keep the manual handy for future reference. Your serial number is located under the name plate label on the left side of your MultiSync MT840/MT1040/ MT1045. Record it here: CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. [. . . ] Or press the "Menu" button on the remote control or the cabinet and use the menu to select your video source: "Video", "S-Video", "RGB", or "PC Card Viewer". Adjust the Image Size and the Focus Use the Zoom ring to adjust the image size, then use the Focus ring knob to obtain the best focus. Use the "Magnify" button (+) or (-) on the remote control to make the image larger up to 400%. Turning off the Projector First press the "off" button on the projector cabinet or the remote control for a minimum of two seconds. The power indicator will go out. CANCEL: Return to the previous screen without storing settings or adjustments. NOTE: You can close the main and sub menus simultaneously by pressing the Computer/Projector Select button to cancel the Projector mode. Repeat steps 2-5 to adjust an additional item, or press "Cancel" on the projector cabinet or the remote control to quit the menu display. Using a USB Mouse Using a USB mouse gives you a smooth operation. A commercially available USB mouse is required. NOTE:There may be some brands of USB mouse that the projector does not support. Operate the Menus using the USB mouse Mouse Cursor When connecting a USB mouse to the projector, you get a mouse cursor on the screen. Unless you use your USB mouse within 10 seconds, the mouse cursor disappears. Menu Display Clicking with a mouse button displays the main menu. To close the menu, click anywhere in the background. Adjusting and Setting Display You can select a menu item and click with a mouse button to make adjustments and setting. Examples Click (or press and hold) the mouse button or to adjust the brightness. Or click and drag the mouse button on the slide bar horizontally to adjust it. If you click anywhere in the background while displaying adjustment and setting menu or dialog box, you will get the main menu at the clicking point. IMPORTANT: · The projector should be unplugged if it will not to be used for an extended period. · To turn off the image and sound briefly (five minutes or less), use the "Picture Mute" button instead of turning the projector off and on. · The projector will display a black, blue image or logo if no input signal is present. · Do not turn the projector off and then immediately back on. The projector needs to cool for a minute before it can be restarted. After the projector turns off, the cooling fans keep operating for a full minute. Do not disconnect the power cable during this time. Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. [. . . ] · · · · Install new batteries. Make sure there are no obstacles between you and the projector. Stand within 22 feet (7 m) of the projector. Make sure that you are in the Projector mode or the Computer/Projector Select button lights in red. [. . . ]