User manual NEC N1100

[. . . ] NEC VERSA N1100 Series Electronic User's Guide Table of Contents Notebook Care Introducing Your NEC VERSA Introducing BIOS Setup for Windows® XP Windows® XP Operating System Introduction Notebook Components Applications Using Your NEC VERSA Preparing for Travel Using Peripheral Devices Setting Up a Healthy Work Environment Problem Checklist Recovery Information for Windows® XP Frequently Asked Questions Safety Notices Glossary License Agreement Copyright Trademarks Official Name of the Software Used Page 5 7 24 26 39 40 49 57 60 62 68 70 73 79 86 87 89 90 91 2 About Your Electronic User's Guide The illustrations, colours and pictures shown are for descriptive purposes. They may vary slightly from country to country and the unit you purchase. Please refer to the finished product for final configurations. Specifications and model names are subject to change without notice. [. . . ] · Clean the outside of the notebook with a soft clean cloth. You can remove stubborn stains with a cloth slightly dampened with a mild detergent. Never use a strong cleaner or solvent on any part of the notebook. Keep food and liquids away from your notebook. Periodically clean the keyboard with a vacuum cleaner brush attachment. Do not use any liquid cleaners on the keyboard as they can damage it. Clean the monitor screen with a monitor glass cleaner and wipe it with a clean, lint-free cloth. If you connect an external mouse to your notebook, periodically clean the mouse as explained below (this procedure does not apply to optical mice): · · · · - Power off your notebook and any peripherals attached to it. Locate the mouse ball cover - Rotate the ball cover counter-clockwise and remove the cover. - Turn the mouse over so that the cover and ball fall into your palm. - Clean the mouse as follows; first use tap water, or tap water and a mild detergent, to clean the mouse ball. Use a clean, lint-free cloth to dry the ball, and blow into the mouse socket to remove remaining dust or lint. - Gently put the ball back into the mouse. - Fit the ball cover back into the mouse and turn the cover clockwise until it locks in place. 51 Security · Basic Input/Output System (BIOS) - refer to the relevant BIOS chapter for more information on how to set Supervisor and User passwords. · Operating System - Set user accounts and passwords. For more information, please refer to: Windows® XP Operating System Introduction · Page Tips for Using Windows ® XP in this Electronic User's Guide. 35 Hardware - Your notebook may feature a Security Cable slot. This lock may prevent your notebook from being moved or stolen. Install an optional Security Cable as follows: 1. Select the object in the room to which you will secure your notebook. Choose an immovable piece of furniture or fixture (a table or desk leg with a cross bar). Take the looped end of the steel cable (For specific models only) and wrap around the immovable object. Be sure to choose an object that prevents an intruder from slipping the cable out from under the object. Feed the locking device through the looped end of the cable. To install the Security Cable, make sure that the lock is in the unlocked position. [. . . ] Any hardware accompanying the Software, shall be limited to NECCAP's then-current hardware limited warranty. Due to the complex nature of computer software, NECCAP and its suppliers do not warrant that the Software is completely error free, will operate without interruption, or is compatible with all equipment and software configurations. You expressly assume all risk for use of Software or program. This limited warranty is solely for your own benefit and shall not be transferred or assigned in any manner whatsoever. [. . . ]