User manual NEC PLASMA50USER

[. . . ] User's Manual Bedienungshandbuch CONTENTS How to Attach Options to the Plasma Monitor . . . E-1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-2 Part Names and Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] All menus disappear. Information PICTURE PICTURE MODE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT COLOR TEMP. NR RETURN EXIT : MEMORY R G :2 : NR-1 OK 3. Use the and buttons to select "THEATER". The mode switches as follows when the and buttons are pressed: MEMORY THEATER NORMAL RESET Types of picture modes MEMORY . . . . . . The last picture adjustments are stored here. Set this mode when watching video in a dark room. This mode provides darker, finer pictures, like the screen in movie theaters. CONTRAST = 80% for RESET mode BRIGHTNESS = 95% for RESET mode NORMAL . . . . . . . Set this mode when watching video in a bright room. This mode provides dynamic pictures with distinct differences between light and dark sections. CONTRAST = 96% for RESET mode RESET . . . . . . . . . . Use this to reset the picture to the factory default settings. PICTURE MODE : THEATER * If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears. E ­ 19 Adjusting the picture The contrast, brightness, sharpness, color and tint can be adjusted as desired. Example: Adjusting the contrast Press the MENU button on the remote controller to display the MAIN MENU on the screen, then. . . Use the v and w buttons to select "PICTURE", then press the "OK" button. Use the v and w buttons to select "CONTRAST". PICTURE PICTURE MODE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT COLOR TEMP. The contrast adjustment is completed. PICTURE PICTURE MODE : MEMORY CONTRAST BRIGHTNESS SHARPNESS COLOR TINT R COLOR TEMP :2 NR : NR-1 RETURN EXIT G OK 5. All menus disappear. R G :2 : NR-1 OK Note: If "CAN NOT ADJUST" appears . . . When trying to enter the PICTURE submenu, make sure PICTURE MODE is set to MEMORY. Information Picture adjustment screen CONTRAST . . . . . . . Adjusts picture detail of VIDEO display. Adjust for natural colored skin, background, etc. Adjusting the computer image Only the contrast and brightness can be adjusted when a computer signal is connected. Restoring the factory default settings Select "RESET" under the "PICTURE MODE" settings. 3. [. . . ] · Eliminate the light by closing curtains, pointing the light in a different direction, etc. · Replace both batteries with new ones. · Plug the monitor's power cord into a power outlet. · Press the remote controller's mute button. [. . . ]