User manual NEC PLASMASYNC 50XM5(MM)

[. . . ] And weighing only 61. 8 lbs/ 28. 5 kg (42MP3), 65 lbs/ 29. 5 kg (42MP4) it actually can be hung almost anywhere. NEC has made sure that a host of multimedia resources can be easily connected and displayed as brilliantly as intended on the PlasmaSyncTM monitor. * You can select RGB source, Component source or Video source for the 5BNC terminal. When selecting an RGB input, the source is switched to the RGB input (3); when selecting a component input, the source is switched to the DVD/HD input (2); when selecting a Video source, the source is switched to the Video input (3). Contents of the Package Plasma monitor Power cord RGB cable (Mini D-Sub 15-pin to Mini D-Sub 15-pin connector) Remote control with two AAA Batteries User's manual Remote cable Safety metal fittings* Screws for safety metal fitting* Ferrite core (small 2, large 2), band * These are fittings for fastening the unit to a wall to prevent tipping due to external shock when using the stand (option). Fasten the safety fittings to the holes in the back of the monitor using the safety fitting mount screws. The features you'll enjoy include: · · · · 42-inch screen 16:9 aspect ratio Capsulated Color Filter (CCF) and black matrix The enhanced display in red uses a two-stage filtering system where AccucrimsonTM is combined with our special CCF. [. . . ] · Is the computer's power turned on?· Is the power management function in the standby or off mode?Part of picture is cut off or picture is · Is the position adjustment appropriate?· Is the screen size adjustment appropriate?· Is the computer's resolution setting appropriate?POWER/STANDBY indicator is · Horizontal and / or vertical sync signal is lighted in orange or red. not present when the Intelligent Power Manager control is on. POWER/STANDBY indicator is · The temperature inside the main unit has blinking in red. become too high and has activated the protector. POWER/STANDBY indicator is ------ ------ blinking in green and red, or green. · Promptly switch off the power of the main unit and wait until the internal temperature drops. · Prompty switch off the power of the main unit. Any shipment of the product (claims must be presented to the carrier). Any other cause which does not relate to a product defect. Burns or residual images upon the phosphor of the panel. Cartons, carrying cases, batteries, external cabinets, magnetic tapes, or any accessories used in connection with the product. and Canada. Plasma Monitors HOW YOU CAN GET WARRANTY SERVICE 1. To obtain service on your product, consult the dealer from whom you purchased the product. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty coverage. Please also include in any mailing your name, address and a description of the problem(s). For the name of the nearest NEC Solutions authorized service center, call NEC Solutions at 800-836-0655. LIMITATIONS OF LIABILITY Except for the obligations specifically set forth in this warranty statement, we will not be liable for any direct, indirect, special, incidental, consequential, or other types of damages, whether based on contract, tort, or any other legal theory, whether or not we have been advised of the possibility of such damages. This warranty is in lieu of all other warranties expressed or implied, including, but not limited to, the implied warranties of merchantability or fitness for a particular purpose. EXCLUSION OF DAMAGES NEC Solutions' liability for any defective product is limited to the repair or replacement of the product at our option. [. . . ] · The front panel buttons of the main unit do not function. · Is the monitor's power cord plugged into a power outlet?Picture appears but no sound is · Is the volume set at the minimum?· Are the speakers properly connected? [. . . ]