User manual NEC PLASMASYNC 50XR5(MM)

[. . . ] For operating safety and to avoid damage to the unit, read carefully and observe the following instructions. Provide adequate space for ventilation to avoid internal heat build-up. Do not cover rear vents or install in a closed cabinet or shelves. If you enclose the unit in a cabinet or rack, be sure there is adequate space at the top of the unit to allow hot air to rise and escape. [. . . ] If the button is not pressed for approximately three seconds, the menu turn off. 13 OFF TIMER To set the off timer: The off timer can be set to turn the power off after 30, 60, 90 or 120 minutes. Press the OFF TIMER button to start the timer at 30 minutes. Press the OFF TIMER button to the desired time. The timer starts when the menu turns off. 30 60 90 120 0 OFF TIMER30 To check the remaining time: 1. Once the off timer has been set, press the OFF TIMER button once. The remaining time is displayed, then turns off after a few seconds. When five minutes remain the remaining time appears until it reaches zero. OFF TIMER28 Canceling the off timer 1. Press the OFF TIMER button twice in a row. The off timer is canceled. OFF TIMER0 Note: After the power is turned off with the off timer . . . A slight current is still supplied to the monitor. When you are leaving home or do not plan to use the system for a long period of time, turn off the power of the monitor. 14 WIDE Operations Watching with a wide screen (manual) With this function, you can select one of four screen sizes. Press the OK button on the remote controller to select a submenu or item. PICTURE/SOUND PICTURE PICTURE MODE : NR : SOUND RETURN MEMORY NR­1 SEL. Adjust the level or change the setting of the selected item by using the cursor buttons on the remote controller. 17 Main menu PICTURE/SOUND Sub menu PICTURE PICTURE MODE NR SOUND Functions Adjusts the contrast, brightness, sharpness, color and tint. Sets the picture mode according to the VIDEO environment and image software. Sets the bass, treble and left/right balance. Functions Adjusts the wide screen's vertical position and size. Adjusts the computer image's vertical and horizontal positions, fine picture, picture adj. Adjusts the vertical and horizontal positions of the menu display. Functions Sets the monitor for use as an energy-saving display when used with a computer. Sets whether to use the RGB still mode or moving picture (video) mode when a computer is connected. Switches the screen when 852 dot x 480 line signals are inputted (when set to "ON"). Turns the on-screen display (channel number, screen mode, etc. ) off (when set to "OFF"). [. . . ] · Replace all two batteries with new ones. · Point the remote controller at the monitor's remote control sensor when pressing buttons, or remove the obstacle. · Eliminate the light by closing curtains, pointing the light in a different direction, etc. · Replace all two batteries with new ones. [. . . ]