User manual NEC PLASMASYNC PX-50XM1A

[. . . ] PlasmaSync Plasma Monitor User's Manual NEC Technologies Important Information Precautions Please read this manual carefully before using your NEC plasma monitor and keep the manual handy for future reference. Warnings and Safety Precaution The NEC plasma monitor is designed and manufactured to provide long, trouble-free service. No maintenance other than cleaning is required. Use a soft dry cloth to clean the panel. Never use solvents such as alcohol or thinner to clean the panel surface. [. . . ] Restoring the factory default settings Select "RESET" under the "PICTURE MODE" settings. G EXIT RETURN 3. Use the and buttons to adjust the contrast. CONTRAST * If neither the or button is pressed within 5 seconds, the current setting is set and the previous screen reappears. 19 Setting the picture mode according to the brightness of the room There are four picture modes that can be used effectively according to the environment in which you are viewing the display. Example: Setting the "THEATER" mode Press the PROCEED button on the remote control unit to display the MAIN MENU on the screen, then. . . Use the L and M buttons to select "PICTURE", then press the PROCEED button. Use the L and M buttons to select "PICTURE MODE". PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT R PICTURE MODE : MEMORY COLOR TEMP. Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more. Information Types of picture modes MEMORY . . . . . . . . The last picture adjustments are stored here. Set this mode when watching video in a dark room. This mode provides darker, finer pictures, like the screen in movie theaters. CONTRAST = 80% for RESET mode BRIGHTNESS = 95% for RESET mode NORMAL . . . . . . . . . Set this mode when watching video in a bright room. This mode provides dynamic pictures with distinct differences between light and dark sections. CONTRAST = 96% for RESET mode RESET . . . . . . . . . . . . Use this to reset the picture to the factory default settings. G EXIT RETURN 3. Use the and buttons to select "THEATER". and The mode switches as follows when the buttons are pressed: MEMORY THEATER NORMAL RESET PICTURE MODE : THEATER * If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears. 20 Setting the color temperature Use this procedure to set color tone produced by the plasma display. Example: Setting "1" Press the PROCEED button on the remote control unit to display the MAIN MENU on the screen, then. . . Use the L and M buttons to select "PICTURE", then press the PROCEED button. Use the L and M buttons to select "COLOR TEMP. ". PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT R PICTURE MODE : MEMORY COLOR TEMP. Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more. Information Setting the color temperature 1 . . . . . . . . . . . . . . . . . . . . . . High (bluer) 2 . . . . . . . . . . . . . . . . . . . . . . . . . Middle (Standard) 3 . . . . . . . . . . . . . . . . . . . . . . [. . . ] · Adjust the "SCREEN" properly. · Press the "WIDE" button on the remote control unit and adjust properly. · Check the input signal. Monitor does not operate when the remote control unit's buttons are pressed. No sound or picture is produced. Picture appears but no sound is produced. Poor picture with VIDEO signal input. [. . . ]