User manual NEC PLASMASYNC PX-61XM1A

[. . . ] PlasmaSync Plasma Monitor User's Manual NEC Technologies Important Information Precautions Please read this manual carefully before using your NEC plasma monitor and keep the manual handy for future reference. Warnings and Safety Precaution The NEC plasma monitor is designed and manufactured to provide long, trouble-free service. No maintenance other than cleaning is required. Use a soft dry cloth to clean the panel. Never use solvents such as alcohol or thinner to clean the panel surface. [. . . ] and The mode switches as follows when the buttons are pressed: 1 2 3 PRO * See page 22 to set "PRO". COLOR TEMP. : 1 * If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears. 21 Adjusting the color to the desired quality Use this procedure to adjust the white balance for bright pictures and dark pictures to achieve the desired color quality. Example: Adjusting the "WHITE BALANCE" Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then. . . Use the L and M buttons to select "PICTURE", then press the PROCEED button. Use the L and M buttons to select "COLOR TEMP. ". PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT R PICTURE MODE : MEMORY COLOR TEMP. The "WHITE BALANCE" screen appears. Use the L and M buttons to select "RED-GAIN". WHITE BALANCE GAIN RED GREEN BLUE BIAS RED GREEN BLUE SEL. ADJ. EXIT RETURN 6. Adjust the white balance using the and buttons. G R-GAIN EXIT RETURN * If neither the or button is pressed within 5 seconds, the current setting is set and the previous screen reappears. Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more. 3. Use the and buttons to select "PRO". and The mode switches as follows when the buttons are pressed: 1 2 3 PRO Information Adjusting the white balance RGB-GAIN . . . . . . . White balance adjustment for signal level RGB-BIAS . . . . . . . White balance adjustment for black level Restoring the factory default settings Select "RESET" under the function menu. Note that this also restores other settings to the factory defaults. COLOR TEMP. : PRO * If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears. 22 Reducing noise in the picture Use these settings if the picture has noise due to poor reception or when playing video tapes on which the picture quality is poor. Example: Setting "NR-3" Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then. . . Use the L and M buttons to select "PICTURE", then press the PROCEED button. Use the L and M buttons to select "NR". PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT PICTURE MODE COLOR TEMP. Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more. Information NR * "NR" stands for Noise Reduction. * This function reduces noise in the picture. Types of noise reduction There are three types of noise reduction. Each has a different level of noise reduction. The effect becomes stronger as the number increases (in the order NR-1 NR-2 NR-3). Turns the noise reduction function off. R G : MEMORY :2 : OFF EXIT RETURN 3. [. . . ] · Are the speakers properly connected?Incorrect 15 PIN connector pin connections. · Are the tint and colors properly adjusted?· Is the computer's power turned on? [. . . ]