User manual NEC POWERMATE DESKTOP INSTALLATION ZIP DRIVE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual NEC POWERMATE DESKTOP. We hope that this NEC POWERMATE DESKTOP user guide will be useful to you.
Lastmanuals help download the user guide NEC POWERMATE DESKTOP.
Manual abstract: user guide NEC POWERMATE DESKTOPINSTALLATION ZIP DRIVE
Detailed instructions for use are in the User's Guide.
[. . . ] NEC PowerMate® Desktop Computers
Installing a Zip Drive
Use the following procedures to install a ZipTM drive in your PowerMate desktop computer.
Note
Use the following procedures along with option installation information in your printed NEC PowerMate user's guide. [. . . ] If you have two CD/DVD-ROM or CD-RW drives already installed on the secondary IDE connector, set the Zip drive as the slave device on the primary IDE connector. See your PowerMate user's guide for other IDE configurations.
Zip Drive Installation
Use the following procedure to install the Zip drive.
1. 2.
Remove the system unit cover and front panel (see your PowerMate user's guide). Remove the 3 1/2-inch accessible drive bracket from the chassis as follows.
T
Disconnect the drive power and signal cables from the diskette drive.
Installing the Zip Drive
1
T T
Press in on the tabs on the sides of the bracket to unlatch it from the chassis (see the following figure). Pull the bracket out of the front of the chassis.
Removing the 3 1/2-inch accessible drive bracket
A Drive Bracket 3.
B Bracket Tab (left side)
Access the empty drive slot as follows.
T T T
Unlatch the bracket cover by pressing the two side tabs inward. To access the tabs, reach behind the front metal shield (see the following figure). Remove the blank panel from the bracket cover by pressing the panel tabs from inside the cover and pushing the panel out. Knock out the metal breakaway panel from the drive bracket front shield with a screwdriver.
Accessing the drive slot
A Bracket Cover Tabs B Metal Panel
C Front Metal Shield D Blank Panel
2 Installing the Zip Drive
4. [. . . ] Connect an unused power cable connector to the Zip drive power connector.
Connecting drive cables
A Pin 1 Edge of IDE Cable B Power Cable 9.
C Zip Drive
Replace the front panel and system unit cover (see your PowerMate user's guide).
455-00325-000 11/2000 4 Installing the Zip Drive [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE NEC POWERMATE DESKTOP
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual NEC POWERMATE DESKTOP will begin.
