User manual NEC VERSABAY IV 6-CELL SECONDARY BATTERY

[. . . ] Clean the battery connector with a dry cloth when it gets dirty. Keep the battery out of the reach of children. !! Information in this publication is subject to change without notice. [. . . ] 4. Locate the NEC VersaBay IV release latch to the right of the VersaBay IV slot. Align the battery in the NEC VersaBay IV slot and push it in until it fits securely into the bay. Inserting the VersaBay IV secondary battery 5. 6. Press the latch back to the locked position. Press the Power button to power on. NEC VersaBay IV 6-Cell Secondary Battery 3 Removing the VersaBay IV Secondary Battery Remove the VersaBay IV secondary battery as you would any VersaBay IV device. See the section, "Removing a VersaBay IV Device" earlier in this document for complete instructions. If you plan to hot swap a VersaBay IV battery and the system is not connected to an AC power source, verify that the primary battery is not in a low-power state. If it is, plug in the system before removing the VersaBay IV battery. Using the Secondary Battery Use these precautions when using the secondary battery in the VersaBay IV slot. Do not run the system on secondary battery power without the primary battery in place. The connector in the primary battery bay can cause a danger if it is accidentally touched, or if it connects with a metal object. If the VersaBay IV slot is empty, always install the weight-saving module to protect the bay and the connector within it. Charging the Battery Charge the primary battery and secondary battery by simply connecting your NEC system to an AC power source. To monitor the charging activity, observe the battery charging LED on the front of the system. The battery charging LED lights as follows: !! Lights amber when the primary battery is charging. Blinks amber if the primary battery encounters an error while charging. Lights green when the secondary battery is charging. Blinks green if the secondary battery encounters an error while charging. During charging, keep the environmental temperature between 32°F and 104°F (0°C to 40°C). For directions on getting a detailed battery status, see the section, "Determining Battery Status. " Determining Battery Status Your NEC Versa system provides tools to help you keep track of the primary and secondary battery power level. If your system is configured (default setting) to display the Power icon on the taskbar, an electrical plug appears when the system is connected to an AC power source or a battery icon displays when the system is not connected to an AC power source. Use the system's power meter to determine battery status. Access the system's power meter in the following ways: ! Move the cursor over the Power icon on the taskbar to display the remaining battery power for the system's primary battery. Right click the Power icon on the taskbar to open the power meter or to adjust power properties. [. . . ] Battery fluid can cause a skin rash and damage fabric. If battery fluid gets into eyes, DO NOT rub; rinse with clear water immediately and consult a doctor. Take extra precautions to keep a leaking battery away from fire. [. . . ]